Amplification Recommendations For Magnepan .7


I am new at this and I am hoping I can get some good advice.  I listened to the Magnepan and fell in love with them.  I've been gearing up to buy them over the last three weeks.  I started reading about them online and I'm seeing that good, powerful amplification is very important to get them to really perform.  At the stereo store I know they were powered by a top flight amp.  So now I have to get an amp/preamp and DAC, integrated amp with DAC or with a separate DAC. I listen to Tidal a good deal.  

The problem is that my budget is limited to around $1200 so I don't know if that can make the cut to get something that can do the speakers justice.  I'm open to buying used.  I would be grateful for any recommendations.  

amritash
@Maplegrovemusic 

Funny that you should mention the synergy between Bryston and Magnepan. I say that because – and I'm dating myself – one of my favorite systems that I ever developed featured an original Bryston 4B and first generation Magnepan Tympani speakers. Great combo!
Can I use a headphone amp/dac/preamp to function as the volume control and DAC with the Bryston?  I have one.

http://en.auneaudio.com/index.php?s=Home/Article/detail/id/97.html

http://en.auneaudio.com/index.php?s=Home/Article/detail/id/97.html

If not, if you folks can recommend a DAC/preamp under $500 that would be great.

Adam
I landed the Bryston 4b-st on Audiogon.  It's the home version and it's in NM condition.  I paid $950.  It popped up last night and I snagged it after it had only been posted for only ten minutes.

Mofimadness - you said that the Aune X1S can serve as the preamp to the 4B-ST.  Can I connect the SVS 2000 that I have to the Aune?  

If I can't connect the preamp to it then do I get a bonafide preamp?  

If that's the case should I look into a Bryston 0.5? Or another preamp that can do the job and used around $300 give or take?

You guys are great.

Adam 


Yes you can.  The SVS2000 only has line level inputs (no speaker level), but it also has an output.

You would run a pair of interconnects from the output of the Aune to the input of the sub.  Then run a pair of interconnects from the output of the SVS2000 to the Bryston.

The SVS2000 has a fixed 80hz/12db per octave high pass filter.  That should work pretty well.

You could also run a set of RCA "Y" adapters out of the Aune, one to the Bryston and one to the SVS2000.  This will work, but might cause some impedance problems.