Why are record cleaners so expensive?

Simao,
I also use the Spin-Clean, but I finish up with a KAB EV-1 to vacuum off the bath water. The EV-1 is basically the top portion of a Nitty Gritty record cleaner, and hooks up to your own vacuum cleaner. At $169, it's an economical alternative to the machines with a built-in vacuum.

I believe the results from this combination are better than using the EV-1 alone and WAY better than the Spin-Clean alone.

Well, Sim, I'll take your question at face value.

First, an ultrasonic machine is not a glorified vacuum cleaner. Not remotely.

Second, sonic difference. I used to clean with a two wand method on a VPI. Now I clean at 80KHz and hear as big a difference as doubling the cost of a component. Many of us have a  $3,000 phono stage, or amp, or table, or speakers. Hence cleaning for $3,000 is perfectly viable on a strict cost/benefit analysis, on this measure alone.

Then there is the cost of a factory retip, about $3000 for mine. Since a recent study showed that the grunge in a record groove is one third diamond grit plus grease, which is a premium grinding compound, removing all of that grit should multiply the lifespan of a stylus. $3000 for record cleaning is a bargain on this measure alone.

Then there are the records. If you have 3000 records, it's only a dollar apiece. Even if you buy at garage sales, a dollar each is not significant, on this measure alone.

So there you have it. Out of reason? Not by my analysis.

If a power cord or a couple of rare records can cost $3k or more why can't an excellent record cleaner cost the same or less?
$3k for a great custom suit is not nearly enough, by the way. Try $8k - 10k. 
Having said that, I do think that $3k machine is overpriced, but so are many things.
Personally, $499 Okki Nokki with Audio Intelligent fluids is all I need. But it takes time and effort, that's not " push button " device.
Rich people employ different kind of mathematics, and from their point of view it sounds like a correct one.
I myself pay $500-$600 for a custom hand made knife from time to time, which would be considered madness by most people. I consider it inexpensive, some cost thousands.

simao  " ...As for the suit, fly rod, and vacation - those are all objects or experiences custom made for one person only (or a couple, in the case of the latter) and not really suited for anyone else. That's a far cry from a mass-produced (relatively speaking) cleaning device. "

Sorry, but you really don't know what you're talking about. Your $3000 hand-made fly-fishing rod is a production item, made from stock materials and finished to your spec. Your $3000 two weeks at a Fijian resort for two? For that kind of money, you're not using a private jet, but a commercial carrier. You'll sleep in a bed once used by others! You'll dine in restaurants that use standardized menus offered to nearly any other diner who enters. And that $3000 custom-made suit from an Italian mill? It's based on a pattern and modified to your specs.

Yes, the suit and fly rod will require a fair amount of hand labor, but they are still production items. The Audio Desk cleaner is also a production item. But that something can be produced in production quantities don't mean it's "mass-produced." For example, a Toyota Corolla is mass produced. A Lamborghini is not, but it's not custom, either. It's a production item.

It's apparent that the Audio Desk cleaner is not for you. No problem! You get to decide for yourself whether it represents good value, or not. Because you called it a "glorified vacuum cleaner" in your original post, it's pretty clear your mind was made up before the conversation here began.