Cary audio cd303t problems
- ...
- 8 posts total
I just replaced the laser drive unit in my Cary 303/300. I bought the part from Cary for $300. Initially I tried a replacement I sourced real cheap off ebay & it was basically a practice run. Played okay but was noisy & the drawer would hang up. Not too bad a job if you're somewhat handy & the Cary tech over the phone was a great help. |
Totally different, what the OP has, his is a 3 beam dedicated CD/SACD laser very different. What you have in the links below for the 303/300 is a dvd rom drive and laser in yours a DSL-710a. I can imagine Cary asking a lot more if they have his in stock. http://www.ebay.com.au/itm/DSL-710A-DSL710A-New-Replacement-Laser-Brand-New-/121939506211? Or the complete drive. Cheers George
|
Jake ... If your CD player is skipping intermittently on all types of CD media (regular and SACD) it is most likely due to the laser sled hitting a dried up patch of the factory lubricant on the guide rail that the laser sled travels along The laser travels on a rail ... the factory lubes the rail during assembly ... after use (and with the help of the heat off the Tubes) the lubricant will dry up in spots ... when the laser sled encounters one of these spots it stalls momentarily losing lock with the data stream on the spinning CD and you hear a skip until it can move beyond the dried up spot and regain lock with the spinning CD If you're handy remove the cover and access the laser ... if you can see the rail ... clean it with a Q-tip and some IPA then very lightly lube it with some White Lithium grease or Vaseline |
- 8 posts total