Audio out to RCA input on new Sony TV's?

Not sure what OP is trying to accomplish, but title of thread suggests OP's trying to send audio to TV via RCA. I think OP wants audio from his new TV to go through his $8K stereo to achieve sound superior to that of the TV. If his $8K stereo can convert digital to audio but lacks HDMI, perhaps a device like that suggested by RW might work If his $8K stereo cannot convert digital to analog, he needs an external DAC.

db

I am asking how to get analog out from a new Sony HDTV into the RCA inputs on my preamp.

Can I just use the headphone mini jack output on the new TV (with a simple mini jack cable to two RCA plugs} into my preamp?

Will this give good sound quality?

I do not want to go the D to A into my preamp (route) if possible.

One more time.

My $8k stereo is a ARC SP-9 MKIII, Son of Ampzilla 2000 amp and Magnepan MGIIIa speakers (no digital anything).

Can I run a 1/8" mini plug cable with two RCA plugs from the headphone out on the new TV, into my preamp, and get good sound quality?

I do not want do deal with HDMI, or a DAC.

Kr4--- What is an Audio Return Channel?

Why did new TVs drop the analog audio RCA output jacks?

Is the earphone 1/8" audio mini jack output jack the same as the old audio RCA output jacks?

Is there an output impedance difference between the new TV earphone output, and the old TV RCA output jack, which could be a problem with a preamp?

There won't be an impedance issue using the headphone mini-jack output, as headphone outputs have to have low output impedance or they wouldn't be able to drive most headphones with reasonable results.

So using an adapter or adapter cable seems well worth trying, although I can envision the following possible concerns:

1)That output MIGHT not provide enough voltage to drive your system to adequate volume levels, although my guess is you'll be ok in that respect.

2)Ground loop hum could possibly be an issue, although again chances are you'll be ok in that respect.

3)I've never had much faith in the ability of 1/8" and even 1/4" connectors to maintain good contact in the event the plug or cable is physically jarred or disturbed. And a momentary loss of contact between the grounds of the plug and jack could put a large transient into the system. So I would make a point of arranging things so that the plug and cable cannot accidentally be physically disturbed.

4)Obviously the sonic quality of the circuit in the TV which drives that output is uncertain.

Regards,
-- Al

If your Sat/Cable Box/DVR is the TV audio source that you want to connect to your pre-amp, see if there is an Audio Out with RCA jacks in addition to the HDMI output. I've used this output in the past for TV audio that eliminates the need to go through the TV circuitry.