Thank you guys! now I have something else to worry about when using my VPI-16.5... But million thanks for 185 degrees tip, I should have read the manual!! Personally, I was always more concerned about the just cleaned side of LP being flipped onto the VPI platter and picking up rubbed-off dirt from not-yet washed side. I used two platter mats: "dirty" and "clean", at least until I bought a rubber mat with zillion mini-pyramids on its surface.
Drying time after a VPI record cleaner?
Hello everyone, I am curious what you all are doing in terms of drying time for your records after you clean them on a VPI vacuum record cleaning machine.
I am using the VPI model 16.5. My routine lately is to put the record on the cleaning plater, blast with an air compressor to remove the easy dust, apply 1 step cleaning formula with brush for 1 minute, vacuum for 3 revolutions, flip repeat. After that, I set the record vertically in a small kitchen dish drying rack made of plastic coated metal. I can fit 13 records in the rack, all vertical, none touching, and only coming in contact with the rack on the extreme edge of the vinyl, so no contact to the actual grooves. I then leave them to fully dry out for several hours or overnight. The thought is, I do not want any liquid that didn't get vacuumed up to remain. (though they look more or less dry to me, I figure it is possible to have some moisture still in there somewhere)
My question is, is this last step necessary? Do you just put the record back into the sleeve after vacuuming? Or, if you do use a dish rack like I do, how long to you let them dry?
I am using the VPI model 16.5. My routine lately is to put the record on the cleaning plater, blast with an air compressor to remove the easy dust, apply 1 step cleaning formula with brush for 1 minute, vacuum for 3 revolutions, flip repeat. After that, I set the record vertically in a small kitchen dish drying rack made of plastic coated metal. I can fit 13 records in the rack, all vertical, none touching, and only coming in contact with the rack on the extreme edge of the vinyl, so no contact to the actual grooves. I then leave them to fully dry out for several hours or overnight. The thought is, I do not want any liquid that didn't get vacuumed up to remain. (though they look more or less dry to me, I figure it is possible to have some moisture still in there somewhere)
My question is, is this last step necessary? Do you just put the record back into the sleeve after vacuuming? Or, if you do use a dish rack like I do, how long to you let them dry?
- ...
- 27 posts total
- 27 posts total