1. Home
  2. tech-talk
  3. 124801-3833

Bass traps - too many choices!!

Browsed the forum and read a lot regarding bass traps. But overwhelming and still not sure what to buy. Looked at the ASC site; and their tube traps are tuned to different frequencies. eBay sells foam wedges which are advertised as corner bass traps. Relatively inexpensive too. But are they effective? I've also heard about using sand-filled cardboard tubes (used for pouring concrete). Even heard that a large potted plant set in the corner can be an effective bass trap.
Can anyone simplify this? I already have Room Tunes in my corners. Speakers are on the diagonal as my listening room is kinda squarish. So I'm just looking to put a bass trap in the corner behind and between the two speakers. But I want to make sure that whatever I buy is effective. 

rockyboy
slaw's avatar
slaw
5,785 posts
 
My first DIY audio project was an equipment rack out of different sized dowels. ( This was of course, before I knew anything about vibration/resonance's effect on what we hear in the end.) I still have it, by the way. Maybe as a reminder, somehow?

Cheers!
slaw's avatar
slaw
5,785 posts
 
rockeyboy: If you haven't already, look up www.mapleshade.com . You'll find their cable risers that are a more simple design.

In the future, you'll need to have a direct correlation of your item and it's effectiveness to the sound of your system.

What state are you residing? Reason being, maybe someone, a fellow audiophile can help guide you?

Regards....
rockyboy OP
335 posts
 
Agree regarding introducing items willy nilly into a system. That's why I've not yet purchased a low frequency base trap.  I'm retired and have to be careful how I spend my money.  
An audiophile friend/designer is coming over this week. Looking forward to his recommendations. 
Think my DIY wooden risers are every bit as effective as Mapleshde risers and at a fraction of the price.

tbg
5,263 posts
 
I have never found wood or metal cables risers worth a damn. Wood is a fair dielectric and at least in my second floor listening room static electricity is the threat. The best are porcelain and glazed isolators.
rockyboy OP
335 posts
 
While you may be technically correct, I can't imagine any system revealing enough to A/B test various risers. If you know of any, I will book a flight tomorrow to assist with that testing. 
More to discover