BEST AMPS FOR WILSON SASHA

It will be an excellent combo. Only 2 times in my life I found Wilson Audio speakers gave a good sound. One was with my sold personal set of XA100.5.

I own the X350.5 now and prefer it over the XA100.5. I use it with the new Purist Audio Limited Edition luminist powercable.

This make the X series sound like XA series but with more controle and more details in the high freq.

This year I auditioned the Sasha with the Momentum power. This was not enough for the Sasha.

The 350.8 delivers more power, but also a lot more electricity compared to the Momentum. This is what you need.

I have done many tests with Pass labs poweramps, with Purist Audio powercables you can reveal a much higher result in sound out of the amp.

I think most people have no idea how big the differences are. When I give shootouts most people get crazy and are amazed about the differences.

The knowledge in audio is poor this means that people only can get an average level out of any speaker at the max.

I have proven that I could reach a higher endresult with a X250.5 with a Purist Audio Limited powercable vs XA100.5 with powercables of 1500 dollar.

Most people never test these things. Here you will find how much higher quality is possible to reveal out of any amp.

hi bo1972, Then , the x350.8 is best match that pass xa100.8 for the Wilson Sasha according to your opinion?

When you want to go on with your speakers, it is a lot better.

Because it can give a lot more amperes. I hope you have a big room as well. Because you need space around your speakers.

I also hope you placed the speakers in the length of the room. You need to understand that you have to adapt to the demands and properties of your speakers.

When you want to get a higher level out of your speakers you need to understand your speaker first. Which cables do you use?

The Pass Labs amps before .5 series are of a much lower quality compared to the .5 and .8 series.

Even a X250 is not able to drive your speakers. You also need the rest of the set of a very high level to have a chance to get a good result out of your speaker.


By using the Ayon also as a pre amp you will loose a lot of quality a poweramp can give. For example; before I bought the Pass Labs XP-20 I used a Meridian 800Daxv4 as a source and pre amp. It is comparable with your situation.

It is far from ideal. It lack dynamics and even details. It also build a less wide and deep stage. 

By far the biggest limitation I have auditioned at many sets in about 18 years of time is that most of them get a low quality out of the speaker they own.

I always bring in sources and cables and sometimes amps to show people how low the level is what they get out of their speaker. When you show them how much higher the level is by using better stuff they realize that the balance is not good.

Here you see that the people who sold it to them, often don't know how tot create the best balance for the money people spend.