CleanerVinyl Ultrasonic record cleaning system.

Sorry, no. But I am having very good success with the Vinyl Stack Sonic Spin kit:
https://thevinylstack.com/view-cart/#!/ULTRA-Sonic-Spin-Kit/p/51658871/category=13505423

And a Trusonik 10L ultrasonic tank:
http://www.ebay.com/itm/311634335445

An apparent advantage of the Vinyl Stack is complete coverage of the record labels as shown in their YouTube video:
https://www.youtube.com/watch?v=9ukvU3I_AWI

Additional factors you should consider are:
1. Filtering the water in your US tank in between batches of records
2. The surfactant solution you use in your tank
3. Final rinsing and vac drying of your records

Some resources for additional information are the following threads at VPI, Audio Kharma and diyAudio:
http://vpiindustries.com/forum/viewtopic.php?f=9&t=2289&start=230
http://www.diyaudio.com/forums/analogue-source/218276-my-version-ultrasonic-record-cleaner.html
http://audiokarma.org/forums/index.php?threads/record-cleaning-youre-doing-it-wrong.689430/page-53#p...

Rushton,
Thank you for this most informative post.
Do you feel Tergikleen is the way to go? 
I will look strongly at the vinyl stack and ultrasonic cleaner 40Khz vs 80 Khz later being 3 times more expensive.

Rafr, I'm not sold on TergiKleen as a solution. It's awfully expensive for something that is basically Tergitol. A simple and inexpensive variant of Tergitol that many people are using very successfully is Triton X-100, recommended by the chemist in the Audio Kharma thread above and readily available from Amazon and Talas.
   http://talasonline.com/Triton-X-100

My tank solution is a combination of Tergitol S-15-3 and S-15-9 (because I cannot obtain the S-15-7 recommended in the Library of Congress formula since I'm not a laboratory). The Triton X-100 is a single alternative Tergitol so one less blending step. (Tergitol is made in a mind-numbing number of slightly different formulations for differing purposes).

FWIW, Harry Weisfeld has tested both 40khz and 60khz tanks and reports he cannot tell any difference between them in the results he hears. ( See: http://vpiindustries.com/forum/viewtopic.php?p=7946#p7946 ) The tank I listed above is a 40khz tank that is also sold with the Ultrasonic Records V-8 kit and has been working well for a lot of people. It's certainly working well for me. 

I am pretty well convinced that you should plan for 1" spacing of your records in whatever setup you choose, and that you not overload the tank. That is: up to 4 records in a 10L tank (not 8) and up to 3 records in a 6L tank.