Minimalized Speaker Length

Wouldn't it make sense to put my power amplifier output terminals as close as possible to the input terminal of my speaker?

I see all these very expensive speaker cables and how they do this and that, and many discussions about their characteristics.
In practical theory, why not just eliminate the cable altogether and run say, a 6" cable (or even less) to the speaker?!

Save all all that money and 'coloring' of the sound?!
Would not be this be the most practical and 'purist' way to go?
All the best recording engineers chose the minimum path possible in pro studios. Why not apply this practice with speaker cables?

I'd enjoy hearing from the AG community on this. Thank you.

There is debate among audiophiles surrounding the impact that high-end cables have on audio systems with audibility of the changes central to the discussion. While some speaker wire marketers claim audible improvement with design or exotic materials, skeptics say that a few meters of speaker wire from the power amplifier to the binding posts of the loudspeakers cannot possibly have much influence because of the greater influence from complex crossover circuits found in most speakers and particularly from the speaker driver voice coils that have several meters of very thin wire. To justify claims of enhanced audio quality, many marketers of high-end speaker cables cite electrical properties such as skin effect, characteristic impedance or resonance; properties which are generally little understood by consumers. None of these have any measurable effect at audio frequencies, though each matters at radio frequencies.[12] Industry experts have disproven the higher quality claims through measurement of the sound systems and through double-blind ABX tests of listeners.[4][13] There is however agreement that the overall resistance of the speaker wire should not be too high.[4] As well, the observed problems with speaker cable quality are largest for loudspeakers with passive cross-overs such as those typical of home stereos.[14]

An accepted guideline is that the wire impedance should not exceed 5% of the entire circuit. For a given material, resistance is a function of length and thickness (specifically of the ratio of length to cross-sectional area). For this reason, lower impedance speakers require lower resistance speaker wire.[4] Longer cable runs need to be even thicker.[15] Once the 5% guideline is met, thicker wire will not provide any improvement.[4]

Roger Russell – a former engineer and speaker designer for McIntosh Labs – details how expensive speaker wire brand marketing misinforms consumers in his online essay called Speaker Wire – A History. He writes, "The industry has now reached the point where [wire] resistance and listening quality are not the issues any more, although listening claims may still be made...The strategy in selling these products is, in part, to appeal to those who are looking to impress others with something unique and expensive."[4]