Who thinks $5K speaker cable really better than generic 14AWG cable?


I recently ordered high end speaker, power amp, and preamp to be installed in couple more weeks. So the next search are interconnect and speaker cable. After challenging the dealer and 3 of my so called audiophile friends, I think the only reason I would buy expensive cable is for its appearance to match with the high end gears but not for sound performance. I personally found out that $5K cable vs $10 cable are no difference, at least not to our ears. Prior to this, I was totally believe that cable makes a difference but not after this and reading few articles online.

Here is how I found out.

After the purchase of my system, I went to another dealer to ask for cable opinion (because the original dealer doesn't carry the brand I want) and once I told him my gears, he suggested me the high end expensive cable ranging from $5 - 10K pair, depending on length. He also suggested the minimum length must be 8-12ft. If longer than 12ft, I should upgrade to even more expensive series. So I challenged him that if he can show me the difference, I would purchase all 7 AQ Redwood cables from him.

It's a blind test and I would connect 3 different cables - 1 is the Audioquest Redwood, 1 is Cardas Audio Clear, and 1 my own generic 14AWG about 7ft. Same gears, same source, same song..... he started saying the first cable sound much better, wide, deep, bla...bla...bla......and second is decently good...bla...bla...bla.. and the last one sounded crappy and bla...bla...bla... BUT THE REALITY, I NEVER CHANGED THE CABLE, its the same 14AWG cable. I didn't disclosed and move on to second test. I told him I connected audioquest redwood but actually 14AWG and he started to praise the sound quality and next one I am connected the 14awg but actually is Redwood and he started to give negative comment. WOW!!!! Just blew me right off.

I did the same test with 3 of my audiophile friends and they all have difference inputs but no one really got it right. Especially the part where I use same generic 14awg cable and they all start to give different feedback!!!

SO WHAT DO YOU ALL THINK? OR I AM THE LAST PERSON TO FIND OUT THAT EXPENSIVE CABLE JUST A RIP OFF?
sautan904
Me. I wouldn't trade my Actinote Arias for anything. I've tried 14 guage following an Absolute Sound comment and it was just OK. The better cables give inkier backgrounds and firmer, more dynamic presentation. And if you're really lucking, greater sense of scale, vividness, and 3-D imaging.
You know it's, what all intelligent people should know, that the only time cable becomes an issue is when you have a very high end & quality amp, to use cable less than 12 awg will constrain the current flow to your speakers, thereby causing a less than full reproduction of the audio frequency spectrum.  As far as the 5k cable performing better than stranded 12 awg, good luck!  But if you need bragging rights and money to burn, then this item is for you...
Cables will make a difference...but, depending. Not by reason of the higher price, by default. It all depends on how precise and well set up your system is. How much transparency potential it has to begin with. And, it involves a lot more than just cables.... If you can not hear a difference? Stop right there and keep the cheaper ones. If you learn along the way the various ways to improve your system’s accuracy and transparency? Then different cables will make a difference. They will.
I found that the most expensive cables might not sound the most accurate realistic. They will sound different though.... and, some will like the "effect" they cause.
So 12 gauge is enough, regardless of current flow, even with a 6000 w/ch@1 ohm, 158 amperes peak current amplifier? Good to know. Digging out that Radio Shack 12 gauge as I write.

I guess all that nonsense about the time-smearing effects of cheap dielectric, the noise-floor lowering benefits of proper construction geometry and superior shielding technology are all figments of the elite’s imagination? Wonder how they ever afforded that stuff, being so gullible and all?

Dave
If you have high end/audiophiles equipments like amps, preamp, speakers, etc, then if you need to buy expensive cables to make your system to sound good or better, then you don't really have highness/audiophiles equipments to begin with. Does this make sense?