Erik it seems reasonable to me to say Class A/B is technically inherently inferior to Class A for the reasons you cited. IS not good Class A always preferred over Class A/B for sound for the technical reasons you cited? Class A/B is used to keep cost power demands and size and weight down for the masses mainly (sound familiar?), not for better sound or performance. Whereas Class D is totally different and can actually challenge Class A especially as the technology continues to improve even further. Of course I prefer my Class D amps over any Class A/B amp I’ve tried already and even a lesser Class A I once owned.
The most unique value of Class D is when much power and current is needed (mainly for bass) as in case of many smaller more extended less efficient speakers that many prefer. As speakers get bigger, loads easier, and efficiency higher, then most any good quality amp can perform well without being too large, heavy and expensive for most, although each will still probably sound different and individual considerations including personal preferences come into play.
So practically, it really pays to decide what one wants or needs the physical profile of their gear to be to meet their needs then choose speakers and amps together accordingly to meet those needs. This practically is the most important thing to consider together I would say way more than any particular technical achiilles heel of any specific amp technology one might obsess on.
No amp including most Class A amps I would say are perfect so choose your poison.
In general., I find Class D amps are the best of all at taking total complete control of speaker which I find tends to yield the best results possible. The result is greater articulation and detail in the bass and a cleaner more dimensional sound overall. Cleaning up/controlling teh bass prevents masking detail at higher frequencies often buried by poor quality or muddy bass when amp is not up to the task of totally controlling the speakers, especially at the low end which is the most demanding and requires an amp to work hardest. Class D amps are MOST efficient and that helps enable achieve this more often than not compared to the competition I would say.
Bass reproduction requires the most work by far and is the biggest challenge for most amps. Class D does this best. For higher frequencies, other amps perform well as do the better Class D amps around these days so not as much to differentiate the technology there although skeptics will attack class D high end as its relative weakness which is a fair statement at least historically. But that "weakness" is one that seems to not matter at all practically as best I can tell these days. Even my modest newer BelCanto C5i integrated that I picked up for a mere $1000 used seems to have gotten everything just about as right as possible and that is a complete integrated amp with phono and DAC 60 watt amp and headphone amp. Its easily as good sounding as anything I have heard within its modest 60w/ch power limitation which will come into play in some cases. OF course no single sound will appease everyone so YM will always vary.
The most unique value of Class D is when much power and current is needed (mainly for bass) as in case of many smaller more extended less efficient speakers that many prefer. As speakers get bigger, loads easier, and efficiency higher, then most any good quality amp can perform well without being too large, heavy and expensive for most, although each will still probably sound different and individual considerations including personal preferences come into play.
So practically, it really pays to decide what one wants or needs the physical profile of their gear to be to meet their needs then choose speakers and amps together accordingly to meet those needs. This practically is the most important thing to consider together I would say way more than any particular technical achiilles heel of any specific amp technology one might obsess on.
No amp including most Class A amps I would say are perfect so choose your poison.
In general., I find Class D amps are the best of all at taking total complete control of speaker which I find tends to yield the best results possible. The result is greater articulation and detail in the bass and a cleaner more dimensional sound overall. Cleaning up/controlling teh bass prevents masking detail at higher frequencies often buried by poor quality or muddy bass when amp is not up to the task of totally controlling the speakers, especially at the low end which is the most demanding and requires an amp to work hardest. Class D amps are MOST efficient and that helps enable achieve this more often than not compared to the competition I would say.
Bass reproduction requires the most work by far and is the biggest challenge for most amps. Class D does this best. For higher frequencies, other amps perform well as do the better Class D amps around these days so not as much to differentiate the technology there although skeptics will attack class D high end as its relative weakness which is a fair statement at least historically. But that "weakness" is one that seems to not matter at all practically as best I can tell these days. Even my modest newer BelCanto C5i integrated that I picked up for a mere $1000 used seems to have gotten everything just about as right as possible and that is a complete integrated amp with phono and DAC 60 watt amp and headphone amp. Its easily as good sounding as anything I have heard within its modest 60w/ch power limitation which will come into play in some cases. OF course no single sound will appease everyone so YM will always vary.