interconnects vs speaker cables vs power cords - which make the biggest difference?

Here is what LFD offers:

http://lfd4u.com/2016/11/29/lfd-phono-stage-upgrade-the-power-cord-first-or-the-interconnect/

LFD AUDIO: Phono stage; upgrade the power cord first or the interconnect?

Posted on 29th November 2016 by Howard Popeck

Hi Howard I just received the Power Cord as ordered plugged in to wall outlet already definite improvement over shunyata cord ,I was wondering if another Power Cord would benefit my lfd phonostage ? or should I look to upgrade my Interconnect from the Spirolink to the grainless first thanks again for your help.

You pose an interesting question. It depends in which direction you want to travel next.

In superficial terms, if there is a desire for greater bass 'heft' and 'slam' then the Power Cord is your next move.

If more detail, less sibilance on female vocals and a greater sense of 'sweetness' then the Grainless is the way to go.

Before you mess with all that, make sure you’ve sorted out room treatment and speaker placement. I’ve had a-ha! moments with power cords, interconnects and speaker cables. But the biggest a-ha! was better speaker placement and decent room treatment. For me, it was more significant than any of the cable changes.

Also, before you dick around with power cables, do you have a dedicated line for your listening room? That can make more of a difference than any power cable..

I must say however that the cable with the most impact on my system was the insertion of a pair Cardas Golden Reference, interconnects.  The change was immediate and very profound so I agree in principle with speaker cable, but in practice the ICs made the biggest difference...

Perhaps/Maybe, depending on system components...
1) Power cords (NO conditioner and/or station)
2) Interconnects
3) Speaker cables
or
1) Power cords (NO conditioner and/or station )
2) Speaker cables
3) Interconnects

but they all make differences even when done individually and in varying order...

I agree all make differences.good cables design to make the system to perform at its best potential, bad cables tend to change/ manipulate the sound.synergy betweens cables is very important and have to be choose carefully. Not always the expensive cables are better than the cheaper ones , demo is a must!