What is the "best" cartridge a Technics 1210...

@lordvampire
Discovery Tonearm Cable is great and not so expensive, for Technics tonearm you need 25cm, but it’s not easy to find, this cable is 4 wire (4 colour) is sold by the foot. You can buy from partsconnexion.com in Canada. I don’t know any other seller who can provide it. Discovery wire is more flexible than Cardas Tonearm Wire, which is widely available and a bit cheaper, but also good option for resonable price. If you want Cardas buy it from thebetteraudiocompany on ebay, they can also custom made headshell lead wires with pins for you from the same Cardas cable. My pair of 1210mk2 rewired with Cardas internally, but my external RCA phono cable is Zu Audio Mission. The 1210mk is not my main turntable, but it was fully upgraded long time ago, before i bought Sp10mk2.

I just ordered Discovery tonearm wire for my Lustre GST-801 tonearm as i wanted something better than Cardas. Another option is Audio Note silver tonearm wire, but this is very expensive.

Personally i don’t care about resonance frequency anymore: 8Hz or 10Hz or 11Hz it doesn’t really matter and anything from 7 to 12Hz is fine, you will not hear the difference!

Most of the MC cartridges are low or mid compliance, while the MM can be mid, high or very high compliance. Your technics was designed for MM cartridges, but mid compliance MC are OK to use too.

Headshell and screws should be non magnetic - that’s all.

The weight of the shell depends on the compliance of the cartridge, the lower the compliance the heavier headshell required on this arm. But when it’s too heavy it will be impossible to balance the tonearm even with small additional counterweight. This tonearm is not designed for heavy cartridge/headshell combination!

I don’t think you are hearing the power supply, the lower the signal on your MC the better shielded phono cable you need. In real life you will never use maximum gain. This is not a high-end turntable anyway, especially with MC cartridge, try it with MM instead for noise problem. I can’t remember any noise problems with MMs i’ve tried on my 1210mk2. I would never invest money for external power supply for this deck, it’s much better to buy another turntable if you want to know what technics is all about (try SP10mk2 with EPA-100 tonearm).

Look for SAEC SS-300 matt - this is the best!

I tried AT150mlx but it was too bright for me, on Ifi phono 2 with 100pf load. I changed the external wires with very good ones, so probably it's because I need to rewire the tonearm.

SAEC SS-300 looks expensive, and I read a lot of reviews for achromat mat for 1210.. it looks like it's better than the stock rubber mat. So I'll try it. But still the main question is what cartridge.. I really liked to try MC cartridge, and I guess it will happen that I will try both 301 and 103 and decide for my taste..

Btw, one stupid question.. does the feet upgrade helps, if I listen only with headphones? the same question for the mat.

I wouldn’t change the rubber mat until you have a cartridge that works fine for you. The reviews means nothing for me, the quality of SAEC SS-300 is better than anything else on earth, especislly the overpriced new toys. If you are looking for new stuff then Boston Audio Mat 2 is another option.

Denon DL-103 is the worst choise for your tonearm, it’s been said so many times here, for this low compliance heavy monster you need at least Jelco tonearm.

Your tonearm is for mid compliance MM cartridges or mid compliance MC.

Technics own vintage MM cartridges works fine with this tonearm, headshell integrated versions like epc-100c mk3 or 205c mk4. If you want warmer carts try MF (moving flux) Glanz MF31 - 51 - 71 and Astatic MF100 - 200 cartridges, they are very good too. Garrott P77 is great, Grace F9-U and F-9F are amazing. Pioneer PC-1000 mk2 is outstanding. Those cartridges are better than more expensive MCs and i have tested them all on sl1210mk2 in the headphones before switched to my reference tonearms and turntables.

Those Denons are just cheap and easy to buy new, many people use them for this reason. It’s not so easy to find top vintage MM cartridges, but when you got them in perfect condition you don’t need an MC, because there is nothing to lose if you load your MM at 100k ohms instead of standard 47k. Read Raul’s MM thread here (tons of information from the best audiogon contributors)!