B&W 801 crossovers


I am debating buying tube crossovers. I have a pair of B#W 801 speakers and was wondering what type of crossover or just have the speaker crossovers rebuilt. If rebuilt who?
gary5341
Vivant,  as far as your question... I don't know about the casters.  On the crossover,  If the components are mounted on a board and hand soldered,  you need to just cut the lead after the protection circuit and reattach the input behind that circuit.  If a circuit board is used, you'll need to break the trace and solder into the circuit in a similar fashion behind the protection circuit... sounds harder than it really is. 
The fantastic folks at Audio by Van Alstine sent me detailed instructions for their suggested crossover modification and it's been three years since completion.
With high grade parts, a soldering  gun and a spool of Cardas silver solder,  the whole project cost $70.00 or so. It took me about 3 hours. Now I would be able to do it in less than an hour. Easy peasy even for a first timer.
(Series II with Series III  tweeters, I am original owner).
The APOC is bypassed, the bass is better integrated than with the alignment filter (discarded) , and just as low (not measured, just my opinion)
The speakers completely disappear. Silky smooth with tons of inner detail.
AND no need to bi wire. The combination of this change along with the addition of a Synergistic Research Powercell LE V2 has added so much refinement, accurate and rock solid 3D imaging that blows your walls out, you will not believe your ears that it is the same speaker. And keep them 6 to 8" off the floor.
This speaker bought on the used market with these modifications is so stupidly cheap in comparison to what is offered for ten to twenty grand. Makes me wonder if a whole industry would halve evolved around the reselling of these vintage gems with these modest modifications for a boutique price, if they were not so plentiful.
I'm using a 2010 ASR Emitter II Battery integrated and Tara Labs Omega Onyx and Zero gold with an upgraded BOW ZZ8.
After this mod, I forgot all about a new speaker upgrade.



Vivant,
Do you know if the mods by Audio by Van Alstine are compatible with the Series 80's?
Do you happen to have the link to the mods?

Thanks,
Kevin

I just had my 802 series 80 crossovers redone by Walt D'Ascenzo of Baltimore. He was a friend of Walter Jung and solved a serious electronics
issue for Wilson audio which they've continued to use. My 802's are better than off the factory floor. Walt has replaced the electrolytic caps, yes, but with mil. spec. parts  with results that are genius. He also turned my EAR 834P into something exquisite. His prices will be less than half of Northcreek and you won't believe your ears.
I know this is an older thread, but I have a pair of B&W 801 and 802 series 80 and am interested in upgrading the crossovers.  How do I get a hold of  Walt D'Ascenzo of Baltimore?  Does he have a website?  Any assistance would be appreciated.