A/V power conditioner under $200

You're not going to find anything worthwhile that includes the features you require at your price point. IMO.

That said, the Brickwall and SurgeX devices are good suggestions for surge protection, although neither has the coax and telephone line inputs you require.

Also, IMO the Brickwall may be a good surge protection device, but I would not look for it to do anything magical as far as the sound of your system is concerned. I own one, and essentially it's sonically benign.

I use both an APC H15 and a Brickwall PWR2AUD. The APC is in my HT system and the Brickwall is in my analog system. Both work effectively in their applications. Tvad is correct regarding the Brickwall, although I notice a slightly clearer sound through it, it is minimal. The APC does improve video quality and allows connection of the amp and sub without current limiting and also has phone, coax etc. I live in the Midwest and this summer we've had horrendous thunderstorms and power outages. All four of my systems stayed protected.

Very happy with my Monster HDP2400. 8 outlets,2 coax,1 phone jack. Very low profile(<2.25 inches). Take a look at this:http://www.onecall.com/ProductDetails.aspx?id=87619

Bill

What are the advantages of a Brickwall or SurgeX over the surge protection offered by the APC H10 or H15? If there's a big protection advantage maybe I could get the best of all worlds by plugging an H10 (since it does most of the things I'm looking for) into a Brickwall or SurgeX product -- would that work or would it put too much of a load on one SurgeX/Brickwall outlet? Of course going this route would increase the overall cost and maybe opens the door to something else that truly does it all, but at least this way I could do it in stages. What do you think?

Thanks again for all the good recommendations.