Tony Gee at Humble Home Made Hifi stated that the higher voltage Jupiter caps sound slightly more spacious in direct comparison to each other. I might get the 600v cap to have the ability to move the caps from speakers to electronics.
I'll hold off on The Jupiters while I test the 3uf Aura T Teflon caps that I installed this past weekend for the tweeters. Do you know how much the crossover point moves from using 3uf caps instead of 3.3uf caps?
I also replaced the Duelund Cast resistors to Path Audio resistors. The original resistors' value is 8 ohm. I purchased the Path Audio resistors rated at 8.2 ohm but actually measures at 8.7 ohm (matched pair for Partsconnexion). I hope that doesn't skew the crossover design too much.
I'll hold off on The Jupiters while I test the 3uf Aura T Teflon caps that I installed this past weekend for the tweeters. Do you know how much the crossover point moves from using 3uf caps instead of 3.3uf caps?
I also replaced the Duelund Cast resistors to Path Audio resistors. The original resistors' value is 8 ohm. I purchased the Path Audio resistors rated at 8.2 ohm but actually measures at 8.7 ohm (matched pair for Partsconnexion). I hope that doesn't skew the crossover design too much.

