Speaker wire/cables opinion

I guess to each is own. Everyone will hear any given system differently. What sound like crap to me might sound good you or someone else. I just finished testing out some $10K and a $2K speaker cables and I could not tell the difference. I went as far as to order 10 feet of Bluejeans speaker cables to try out against these high $ cables, still could not hear the difference. I went as far as going to Home depot and bought 10 feet of 10 gage  cable and to my surprise there is almost no difference that I could  say "Wow". Then again others might differ in what they hear. Imaging listening to a nice piece of music in your car with the windows wing up. When you wind down the windows what happen? you quickly wind it up again because of the difference in sound you hear. This is the kind of night and day difference I was expecting to hear when comparing the high $ cables with the cheaper cables. No way close in my experience.
 I think it all boils down to what suits you/me in our listening room, so lets agree on that.
I will keep my Bluejeans, Home Depot, and Audio Art speaker cables for now. 

No worries.  The cables running from crossover to speakers are so short that the added resistance to the speaker system as a whole is negligeable.  If you would change these cables for less resistant ones, it would be like taling off 10lbs from your car to get better accelerations.
if you have a 12 or 14 gauge cable made of really vgood copper, well insulated and exhibiting very low inductance, and great connectors, you are not missing anything.

I don’t think the choice of speaker cables will and should make a night or day difference unless you’re running very long runs, like 100 feet+. I also believe the difference in cables, speaker or interconnects, is very system dependent. The only time I could easily distinguish between an average quality speaker cable (10’ @ $75)and a high end cables (10’ @ $2400), all else being equal, was in a system consisting of an 8 wpc SET tube amp driving a pair of Zu Druid (100 dB @ 1w) speakers. As close to night and day as I’ve ever come when switching speaker cables.

Human brain above all tries to keep a balance .
If you might upset  that balance by changing long held beliefs, it can and often does, stop you from hearing ,seeing or even grasping anything  that might change them .

As Trump said , he could go out on 5th Ave and shoot a stranger and not lose a vote .
Ever seen a hard-core racist change his mind through rational discourse ?
Neither has anyone else .

Kalali:
I do agree with you on long cable runs. I can see how resistance would have an impact on the signal with lengths over 10'. And I do believe that cables do make a difference in the audio system. Because I have experienced that before; but in my system I was never able to tell the difference between the cables that I tested. I am running an all McIntosh system (MC 601, C2500, MPC1500, MEN220, MCD 301) with Wilson Audio Alexia speakers, and VPI Classic Signature turntable. If anyone has a similar setup and has experience the differences with cables (both interconnects and speaker cables) please let me know which cables you are using. I am not searching for only the differences, I and searching for a good set of cables that matches my system.