Antelope 10MX Rubidium Atomic Clock vs S.S 10M Rubidium Audio Clock

@folkfreak 

I really appreciate the fast response.  I still don't understand whether the Cybershaft clock will work for a dCS Rossini DAC. 

As you know the Rossini DAC has 2 Word Clock inputs, so it can be supplied with either 44.1kHz or 48kHz clocks, depending on the sample rate of the source. The Rossini Clock has both 44.1kHz and 48kHz outputs and the Rossini DAC auto-selects which clock frequency to use.

I don't believe the Cybershaft clock has both clock frequencies. What am I missing about the Cybershaft clock working with a Rossini DAC?

Unfortunately the Cybershaft clock will not help as with other 10 mHz true master clocks, it puts out a 10 mHz, 50-ohm signal and connection.  The DCS Rossini DAC is limited on taking only re-clocking signals that are multiples of 44.1 or 48.0 (Hz) which would be over a 75-ohm connection and further it does not accept master-clock signaling of 10.0 or 22.xxx mHz.

Regardless of the ohm rating, the Rossini does not according to its docs accept a 10 mHz connection.

@zephyr24069 
Thanks for the clarification.  Looks like there may be no financial shortcuts to using a non-dCS external clock with a Rossini.