1. Home
  2. speakers
  3. 130310-80275

Vandersteen 2Ci - Bi-wire cable question

This might sound like a stupid question but I'm going to ask anyway. I see lots of bi-wire speaker cables with one pair wire connection to the amp on one side and two pairs (bi-wire) on the other/speaker end. I always questioned the wisdom and wondered how these cables are made. So here's my question: Are there any benefits in "converting" my regular speaker cables into bi-wire by simply splicing two short pairs of  cables, of course same quality as the main cable with connectors on the speaker ends.The speaker in question is Vandersteen 2Ci which doesn't have jumpers. I'm also wondering how folks hook up regular speaker wires to these speakers.

Or, I should also ask if a bi-wire connection mandatory on these speakers? Thanks.

kalali
geph0007's avatar
geph0007
165 posts
 
In order to remove the sock (if that is what you are asking)  you have to 1)turn the speaker upside down and remove the 7 screws from the bottom plate
2) You then need to pry off the bottom plate as it is glued on
3)  There are then  about 30 staples holding the sock on  You need to remove them  The sock is pretty tough
4) You can then roll the sock down
Reverse process to put back  Done it several times Not hard at all.
gdnrbob
2,421 posts
 
For me, removing the sock would not be high on my agenda.
B
tomic601's avatar
tomic601
2,164 posts
 
For that long of a run you need good wire.
i had a L shaped layout with Vandy 3a signature with 20' runs - they benefited greatly with a shotgun biwire pair of Audioquest Type 6 wire.
most of the questions you are asking are in the Ask Richard part of his website
he strongly prefers bi-wire and external if possible

hifiman5's avatar
hifiman5
1,611 posts
 
+1 tomic601   If you can swing it at some point you would do well to upgrade the quality of the wire you're using.  Vandy's are sufficiently resolving of fine details that it Will make a difference.
gdnrbob
2,421 posts
 
Yup, that is a long run. A nice set of AQ Rocket 88's would be your best bet in my humble opinion. A used pair can be found for not that much money and often turn up on Ebay or Audiogon.
Audioconnection helped me reterminate a set of Rockefellers in to true Bi-wire. I need to see if he has any Castle Rock.
Bob
More to discover