"...dropped the dime and traded the X150.8 for the X250...its clearly better than the X150.8"
You just proved the old car guys adage that there's no replacement for displacement.
Better in what way?
Amplifier Upgrade Decision
Hello,
I need some help/feedback with regards to upgrading my power amplifier for 2 channel music. My current set up includes following components
1. Source (Digital)- Oppo BDP-95
2. Source (Analog)- Clearaudio Concept Turntable
3. Pre-Amplifier- Parasound Halo JC-2
4. Pre-Amplifier- Parasound Halo P-7 (using the phono interface for playing the turntable)
5. Power Amplifier- Parasound Halo A-21
6. Front Speakers- Aerial Model-7T
7. Power Cable- Nordost Heimdall 2 and Red Dawn 2
8. Interconnect Cable- Nordost Frey 2, Heimdall 2 and Red Dawn 2
9. Speaker Cable- Nordost Red Dawn 2
10. Wall Receptacle- Furutech GTX-D NCF(R)
11. 2 Dedicated 20 Amp (10 AWG) circuits feeding the entire system
12. GIK Room Acoustics Bass traps/Diffusors
13. Room size- 16’ X 12’
This set up sounds good but I wanted to take it to the next level and wanted to upgrade my amplifier to a better 2 Channel amplifier or a set of mono-blocks. I love Class A/AB sound and would like to stick to this technology. My choices, not in any particular order, are
1. Upgrade to a Plinius SA 103 (125 W pure Class A per channel) and use it as a 2 channel amplifier
2. Upgrade to a set of Class-A mono-blocks. My choices, not in any particular order, are
a. Parasound Halo JC-1
b. Pass Labs XA-60.8
My budget is around 10-12K.
I know everything is system dependent but I would love to hear your opinion on these amplifiers before starting on product evaluation.
I am also not sure if my mono-block amplifier choices would provide significant value add from a sound perspective over the Plinius or any other good quality 2 channel amplifier at this price point. So I would love to hear your feedback on this point as well.
I need some help/feedback with regards to upgrading my power amplifier for 2 channel music. My current set up includes following components
1. Source (Digital)- Oppo BDP-95
2. Source (Analog)- Clearaudio Concept Turntable
3. Pre-Amplifier- Parasound Halo JC-2
4. Pre-Amplifier- Parasound Halo P-7 (using the phono interface for playing the turntable)
5. Power Amplifier- Parasound Halo A-21
6. Front Speakers- Aerial Model-7T
7. Power Cable- Nordost Heimdall 2 and Red Dawn 2
8. Interconnect Cable- Nordost Frey 2, Heimdall 2 and Red Dawn 2
9. Speaker Cable- Nordost Red Dawn 2
10. Wall Receptacle- Furutech GTX-D NCF(R)
11. 2 Dedicated 20 Amp (10 AWG) circuits feeding the entire system
12. GIK Room Acoustics Bass traps/Diffusors
13. Room size- 16’ X 12’
This set up sounds good but I wanted to take it to the next level and wanted to upgrade my amplifier to a better 2 Channel amplifier or a set of mono-blocks. I love Class A/AB sound and would like to stick to this technology. My choices, not in any particular order, are
1. Upgrade to a Plinius SA 103 (125 W pure Class A per channel) and use it as a 2 channel amplifier
2. Upgrade to a set of Class-A mono-blocks. My choices, not in any particular order, are
a. Parasound Halo JC-1
b. Pass Labs XA-60.8
My budget is around 10-12K.
I know everything is system dependent but I would love to hear your opinion on these amplifiers before starting on product evaluation.
I am also not sure if my mono-block amplifier choices would provide significant value add from a sound perspective over the Plinius or any other good quality 2 channel amplifier at this price point. So I would love to hear your feedback on this point as well.
- ...
- 41 posts total
- 41 posts total