Check with Garrott Bros in Oz.
Cartridge with broken coil wire
Hello
I have a Miyabi standard that needs repair. There are 2 fine wires that have be broken where they connect to the output pins. I was told not all retippers will be able to resolder these delicate wires. Could anyone suggest a retipper/repairer that can undertake this task?
I am nor sure whether this was a coincidence or not, but this damage was done about a week after i used the degauss function on my Vida phono stage.
I am based in Australia
I have a Miyabi standard that needs repair. There are 2 fine wires that have be broken where they connect to the output pins. I was told not all retippers will be able to resolder these delicate wires. Could anyone suggest a retipper/repairer that can undertake this task?
I am nor sure whether this was a coincidence or not, but this damage was done about a week after i used the degauss function on my Vida phono stage.
I am based in Australia
- ...
- 14 posts total
Northwest analogue in UK is the only ''retipper'' willing to ''mess'' with the coils. They invented some machine for the coils. However in your case any retipper should be able to (re)solder the wire which are broken ''outside'' of the coil. This means that the (broken) wire is reachable without the need to remove the coils from the so called ''joint pipe''. Northwest site: www.northwestanalogue.com |
- 14 posts total