Taralabs cables


Hi, I wanted to start a new thread for all the owners of Taralabs cables, Enjoy, and cheers.
audiolabyrinth
Making Sense of … Standard and SP version Speaker Cables
At TARA Labs, the major design goal for speaker cables is to reduce the inductance in the cable. However, there are some high-end amplifiers that need to 'see' some level of inductance (L) in the speaker cable. When the low damping factor of certain amplifiers is connected with (ultra-low inductance) TARA Labs speaker cables, the output of some high-end loudspeakers becomes audibly variable at different frequencies.Extreme Audio Systems and Extreme Performance Cables with Low Inductance specifically for speakers that require additional inductance in a speaker cable.
The phenomenon is readily apparent, heard as bass that is soft and low in amplitude, sometimes together with high frequencies that are too smooth or rolled-off. Basically, the resistance in the loudspeaker cable should be ultra-low, and the inductance (L) in the cable needs to be low but sufficient to provide a load to certain amplifiers. There is no ideal value for (L). It varies from system to system, just as impedance varies with frequency in most loudspeakers.
The loudspeaker cables carry much higher signal voltage and current into a non-linear impedance (the loudspeaker) ... so the reactive load of the loudspeaker can be difficult for some amplifiers to drive... and the all-important damping factor of the amplifier changes from amplifier to amplifier.
One of the great attributes of TARA labs high-end Speaker Cables is their ultra-low inductance. These Speaker Cables are the 'state-of-the-art' in both technology and design from TARA Labs. Its performance level is absolutely spectacular when matched with the majority of high-end audio components available today. And as with an ever increasing introduction of new components into the marketplace, we have found over and over again that not every cable or component has the perfect symbiotic relationship with each other. In these particular instances, there are some amplifiers that need to 'see' some level of inductance (L) in the speaker cable. For certain loudspeakers and amplifiers, these cables are designed to work exceptionally well with amplifiers with a low damping factor or loudspeakers with a very reactive load in the lower frequencies. In addition to inductance, TARA Labs SP model speaker cables are also designed for audio systems that are inherently bright or strident in their sound. They offer a controlled bandwidth by being more forgiving with glare or stridency.
 

Professional Concert Tour Cable




PROFESSIONAL CONCERT TOUR CABLE
This cable is made exclusively for the rigors & hardships of concert tours on the road. Cable is sleeved with a special “non-skid” jacket perfect for playing on stage. *The PX silentPLUG is fantastic for this cable as it allows a musician to unplug and switch instruments without the hassle of turning down/off your amplifier. (*See below CABLE TERMINATION)  (Click on image to enlarge)
INSTRUMENT CABLE INFORMATION
TARA Labs has taken its incredible thirty year expertise in cutting edge technology & design, and developed a high-end instrument cable. Used with guitar, bass, keyboards, or in the recording studio. Used in recordings by Stanly Clarke, Patrice Rushen, Kenny Burrell, and endorsed by such legendary musicians and producers as; Larry Carlton, David Benoit, Nathan East, Jeffrey Webber, in addition to such prestigious venues such as Carnegie Hall, Capitol Records studio, Sony studio.
CABLE CONSTRUCTION
Every TARA Labs cable is custom hand-crafted to order in Oregon, USA. The construction of this cable begins with our RSC (Rectangular Solid Core) SA-8NOF (Super-annealed, oxygen-free, mono-crystal, frequency-tuned, hand-polished 99.999999% pure copper conductors. This is covered with advanced Aero-PE dielectrics and skid-resistance outer sleeve.
CABLE TERMINATION
TARA Labs also makes available the “silentPLUG” for cable termination. The new PX silentPLUG automatically mutes (shorts) an instrument (guitar) cable to avoid pops and squeals when changing the instrument (guitar) under load. The integrated silent switch is based on REED-technology and guarantees a lifetime beyond 10 '000 mating cycles. The new PX silentPLUG features a rugged metal shell enhanced with a rubber cushion overlay for improved shock protection. The plug itself is gold plated. The “silentPLUG” is exceptional when used in situation where instruments are being interchanged, without having to either turn-down or turn-off the amplifier. All termination is gold-plated.
*Straight plug & Right angle plug available / ¼” mono or stereo termination connectors are available
CABLE SOUND
You will hear exquisite high frequency extension, tight bass, spatial cues, and full mid-range that is detailed and open. A low-noise floor, and excellent sound-stage. Both cable models offer superior quality. These cables are far beyond any other high-end instrument cables available in the marketplace today. Endorsed by the worlds leading recording studios, music venues, and musicians.
For musicians and producers who demand the very best in equipment, instruments and recording.
WARRANTY
All TARA Labs cables have a lifetime guarantee against manufacturer defects.


Air Phono

TARA Labs Air phono is another high-end phono cable that is available from TARA Labs, and is part of our legendary “Air” series audio cables collection. Its low price for a specialty cable make this an excellent choice for audiophiles who need a reference grade phono cable. It is suitable with all cartridge voltages. Sonically the cable is open and revealing, with excellent high frequency extension and detail. It is recommended for a wide variety of cartridges.  (Click on image to enlarge)

  • Conductor is: 99.999999% Oxygen-free, mono-crystal, rectangular solid core.
  • Available termination: RCA, XLR, 5 pin DIN
  • Handcrafted in USA and lifetime guaranteed
  • High-frequency extension & detail
  • Tight bass & midrange
  • Very revealing

TARA Labs HFX Floating Ground Station System
The HFX Floating Ground Station is an extraordinary component that is included with all reference “Extended” bandwidth interconnect cables. TARA Labs proprietary ground station system is made of mil-spec aluminum alloy. Our specific metallurgical properties allow for the reduction of radio frequency interference (RF) and electromechanical resonance; EMI/RFI. It's 18.23% heavier and stronger than aircraft-grade stock. Equipped within the HFX station is a patented ceramic composite of metallic oxides and an amalgam of mineral elements in a proprietary ceramic binder called "Ceralex."
Because the HFX functions completely outside of the signal path, its ability to dissipate and eliminate the effects of EMI/ RFI (Electromagnetic interference & Radio frequency interference) which also includes sonic distortion, noise, "snow", and lack of image clarity. What the listener will hear using the HFX system is more high frequency extension, incredible details, tighter bass and full mid-range, including enhanced musicality and neutrality which are all signature characteristics of TARA labs high-end audio cables. The HFX Floating ground Station System comes complete with a variety of mini banana & spade leads to connect it to virtually any component. The appearance of the HFX station is one of beauty and elegance, in addition to its superb performance.

The Grandmaster Evolution w/HFX




The Grandmaster Evolution Series from TARA Labs is truly beyond belief. It is quite simply the new watershed in the art and science of audio cable design. The Evolution Series is in a class of its own, beyond all other audio cable products in the history of the audio industry worldwide. 
The Grandmaster Evolution Interconnect uses the same multi-lumen air-tube concept invented by TARA Labs as used in the ZERO Interconnects and the AIR Series Interconnects originally developed in 1986. However, the Evolution Interconnect is remarkably flexible.
The Evolution Interconnect uses the same displaced and Floating Shield design together with a new Dual Mono-Block HFX Ground system with greater absorption of RF/EMI and a vanishingly low background noise.
Incredibly, the new Grandmaster Evolution Interconnect boasts a remarkably low capacitance figure of just 2 pF per foot. This means that the new Evolution has a High Frequency bandwidth that is more than 300% greater than any other high-end cable in the world.
The Grandmaster Evolution = 2pF (cable capacitance measured in picofarads / pF)
The most advanced air-tube technology and designAll new proprietary "dual mono-block" floating ground station (HFX) and floating shield systemControlled spacing of conductor to conductor geometry, produces record low interconnect capacitance of a mere 2 pf (picofarads)Additionally the conductor to shield capacitance is remarkably low so the EMI/RFI coupling from the shield to conductors is negatedThe outer shield is expanded and spaced away from the conductors to such a degree that the background noise is at an all-time lowTwo layers of anti-corrosion coated SAOF-8N copper shieldCompared to the Zero Evolution, The Grandmaster Evolution has a larger, more complex system of Teflon and Aero-PE filaments that ensure a complete air dielectric system.The most revealing and lifelike presentation possibleCompared to the Zero Evolution, The Grandmaster Evolution has a high-frequency bandwidth that is 50% greater, with a stunning low level of background noise contrasted with more image outlines and fine detailRevolutionary liquid micro-film (LMF) dielectric ensures a linear transfer of low-level ambient and spatial information