Making Sense of….Gen 3 Conductors
TARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
The Gen 3 conductor has an increased bandwidth and high-frequency extension that makes it unrivalled in important test measurements and listening tests.
The new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
TARA Labs' Matthew Bond explains why this is possible: “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
The new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. The Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. The term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.
TARA Labs is widely known as the leader in cable technology and audio cable design. They are based in Oregon, and all cables are hand-made in the USA.
TARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
The Gen 3 conductor has an increased bandwidth and high-frequency extension that makes it unrivalled in important test measurements and listening tests.
The new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
TARA Labs' Matthew Bond explains why this is possible: “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
The new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. The Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. The term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.
TARA Labs is widely known as the leader in cable technology and audio cable design. They are based in Oregon, and all cables are hand-made in the USA.