Just retired and want to get back to vinyl listening


I'm reeducating myself.... after years of no TT and focusing on just stereo listening.. I had a some early Klipsch Hersey’s and some GENESIS speakers pair with Yamaha receiver and low end turntable 30-40 years ago -- I can afford a higher end setup this days -- so what are thoughts on pairing a luxman l-550axII with Klipsch cornwalls?

I like the Herseys for music in the day.. cornwalls seem to be larger herseys but may well need audtion some of the tower types folks seem to tout..

I still thinking on TT -- but may get a VPI scout or prime -- thinking through the cartridge choices and other things is still a serious education -- recc?

music taster are varied -- jazz to singer vocalist miles davis - linda Ronstadt and a host of others for vocal musics and instruments- soft rock of the 70-80s- to some classical

thoughts -- looking to 15-20K for the refit for stereo listening - but could stretch some if I like the setup

steventoney
I think the Luxman you are considering is a "can't go wrong" move. It will provide a baseline for phono, line stage, and power amp that will each be difficult to beat, and it gets you going right out of the box without agonizing over which other components might or might not appeal to you and still work well together.

Harbeth Super HL5 Plus speakers are no slouches - they sound a lot like Quads to me - I'd give them a listen too, if possible.

The Concept/Maestro combo seems like a good way to start on a vinyl journey - it should sound great without spending $20K, until you are sure you want to go further in the vinyl pursuit.  :)


thanks sql...

I think I’m good with starting with the clearaudio concept wood for my first foray back into vinyl after 35+ years...

as noted earlier in the thread -- I listen to Harbeths -- specifically the M30.1 with a synthesis A100T tube integrated -- it was really good and in the same shop I listened to Audio Note AN-Es and AN-Js again with tube integrated -- IT was close but I thought the AN-E were a little better for my taste that the M30.1s the AN-E is very much like the Devore O/93 that I will audition this Wednesday -- I listened to the Gibbon X on a line magnetic tube integrated amp at the shop last time -- they also were very nice -- I’ll to some other speakers mentioned after I move next week -- but the Harbeth - Devore - Audio Notes are real contenders for the new setup

The integrated amp part is still leaning to the Luxman, but I also like the looks of the Leben CS600 as a tube amp, but that puts me into having to get a phone preamp/stage - which I do not know if I quite there yet.. the whole tube versus a SS class amp like the Luxman is a hard choice.. would be nice if I could audition these as well -- but the amp and speakers will be on back burner until after I get moved to Spokane and find a new place to live.......... moving van comes next Monday

I do have a question -- if folks would be so kind -- about pro/cons on using the rca line inputs - outputs versus the balanced I/O on some of these equipment pieces -- I have no experience at all on the balance I/O - thoughts?
I do have a question -- if folks would be so kind -- about pro/cons on using the rca line inputs - outputs versus the balanced I/O on some of these equipment pieces -- I have no experience at all on the balance I/O - thoughts?
The simple answer is to not worry about it. Both work well. 
The more complex answer is that a huge amount of gear that offer balanced outputs and inputs don't offer true balanced circuits all the way through so the balanced option is more of a convenience thing allowing someone with a bunch of XLR interconnects the option to use them. True balanced circuits offer significantly less susceptibility to hum caused by various factors including grounding (mostly) but also rejection of EMI/RFI. 
I recently switched over from single ended (RCA) to balanced (XLR) interconnects hoping to take advantage of true balanced hardware and I don't notice much difference. Most of the Stereophile reviewers have made comments from time to time about noticing very little difference between single ended and balanced such that they mostly use singled ended interconnects. From a purely practical standpoint though, XLR is so much easier to connect and disconnect than locking WBT-style RCA barrels-I am happy to be away from those. Also, I don't know why it is, but cable manufacturers dwell over their choice of RCA connectors and often have very pricey options offered as upgrades and yet with XLRs they usually just have one option and leave it at that. I have seen obvious XLR "jewelry" on very expensive IC's but even the manufacturers don't seem to dwell much on the cost/quality of XLR connectors as being crucial. 
I do have a question -- if folks would be so kind -- about pro/cons on using the rca line inputs - outputs versus the balanced I/O on some of these equipment pieces -- I have no experience at all on the balance I/O - thoughts?
There are several things to understand about balanced. I'll try to not make it too confusing.

There is this thing that is the balanced line standard. It is spelled out in the Audio Engineering Society (AES) file 48.  If your equipment conforms to the standard, a fun thing happens- you can run longer interconnects and they don't have to be exotic (and exotically priced) to sound excellent.

Unfortunately many high end audio companies that offer true balanced equipment don't actually support that standard. The reason is that its hard (see points 2 and 3 below) and some companies don't seem to be aware that it exits.

As a result you'll see really variable comments ranging from mine- which usually read something like 'Once you've heard it set up right, there's simply no going back' to 'balanced is just a gimmick and offers no performance improvement at all'. The latter happens when the standards are ignored. So its important to check with the manufacturer to see if their equipment supports the standard.

In a nutshell, here's the standard:
1) pinout: pin 1 of the XLR is ground, pin 2 noninverting (in the US), pin 3 is inverting (in the US)
2) the output occurs between pins 2 and 3; pin 1 (ground) is ignored and is only used for shielding
3) the system is low impedance; a preamp supporting the standard should be easily able to drive 1000 ohms without frequency response or distortion problems.

FWIW, all cartridges made today are balanced sources. That is why turntables always have that funny 'ground wire' that no other 'single ended' sources seem to have. The ground wire is the shield. So if you have a turntable the signal can easily travel from the LP to the preamp input via a low impedance balanced line- and thus the signal will be more immune to the interconnect cable, making for greater transparency and lower noise to boot. Usually all that is required is to change out the interconnect cable.

An obvious advantage of balanced operation is that you can run long cables. 50 feet is no worries between preamp and amp so its possible to run monoblock amplifiers placed by the speakers and run really short speaker cables- which will ultimately help you with impact and definition. Once you've heard that greater definition, its hard to go back.

The most common myth about balanced line is that its more expensive and there are twice as many components. This is false. It does take more parts, but not twice as many- maybe about 50% more (unless the execution is poor). However your interconnect cables don't have to be as expensive. I think mine cost me about $150.00 for the pair and they are 30 feet long. In practice, the cheaper cables more than make up for the difference in price and quite often you can have greater performance to boot.
atmasphere,

Excellent commentary as usual. I have been long IC, short SC for years. I always used RCAs. Recently switched to XLRs - pre to amps. Now in the camp of;  "Simply no going back"