Best practices when conducting a DAC comparison

The most surprising (and significant) tweak that has improved my digital playback is adding an LPS to my modem/router. It replaced the cheap wallwart. When I put my best power cord on the LPS, the sound improved considerably more. And yes, an upgraded fuse took it a step further. If you haven’t already, I’d highly recommend attending to this source to the source. The improvement is far from subtle.

How can somebody say that there will only be tiny differences between dacs? Maybe this guy hasn’t heard a lot of dacs. There can be big differences between dacs. Also, I don’t agree that you have to use the same cable or input to compare different dacs. If you are only using usb, then sure you have no choice, but if you have an option of using i2s, toslink, or spdif, then I would use the cable that the dac prefers because you want the best sounding dac that you can afford. I would never go back to usb, and I would tend to use i2s if possible.
Also, ignore all the measurement specs that some reviewers post, IMO they are worthless. Who cares if 1 dac has .0001% distortion and the other has .0005%, you think you are going to hear that? That’s like asking the Porsche dealer to give you a readout of the compression of each cylinder before you buy a new Porsche. You have the best instruments to do your evaluation and that your ears.

What I haven’t seen is your requirements for the dac and this is where you can get huge differences. Do you want the dac to support MQA? DSD and which resolution? I have some MQA tracks that surpass vinyl by not a small margin.
I would make sure that your volume levels are set the same and then test each dac with your favorite music using various inputs unless you are stuck with only 1 interface.

@steakster  Agreed! They definitely make a difference, including the upgraded DC cables. I've been running HDPlex to power the switch, server, etc. for quite some time now. I'll probably play around with different brands once the major components are finalized.

there will only be tiny differences between dacs relative to most speakers, room tmts., etc.

galvanic isolation can be a biggie for a DAC -- besides an opto-isolation technique, a LPS, and/or star-quad DC power cables are good ideas

@rbstehno Thank you for your response.

Some differences: the Denafrips offers DSD; higher resolutions of PCM; Over Sampling; three I2S inputs, and an extra set of Coax, TOSLink, AES each, but no BNC --- over the Yggdrasil.

Unfortunately, probably fortunately for some : ) MQA is not an option for either DAC at this time. It would have been a nice feature to have.