Step down transformer (220V to 100/110V) or buy 220V version of Shindo preamp

@essrand

The type of transformer matters. Most step down transformers are also called autotransformers. They use a single winding to convert the voltage from 220 to something less.  More here:

https://en.wikipedia.org/wiki/Autotransformer

A balanced transformer has 2 separate windings, which offers better noise isolation and some ground loop isolation.

Best,

E

@essrand 

I have been in your same shoes: moving from US to a 220V country with my audio.

The 220>110 transformer will certainly work without problem, and what glennewdick said above is a good guideline. Whether this affects sound will depend on the quality of the transformer, I imagine.

Using a balanced transformer might be an opportunity to treat the power you feed the pre additionally to going from 220 to 110V.

I had an amp changed to 220V by my US dealer before moving. The amp transformer had 220V taps so it was easy work. Still use it 10 years later and sounds great.

Lastly, check the Shindo owners manual if you haven't yet. My Lamm pre was prepared for multiple voltages. When I moved I simply had to take out the 110V fuse, buy one for the 220V rating and place it in the 220V position and that was it.

I would not let a tech other than Shindo mess with the amps though.

@erik_squires 
"About sound, if you use a fully balanced transformer, you may actually improve the overall sound quality."

Can you recommend a company in the U.S. That makes such transformers?
thanks 

Equi Tech is the name most often seen in audiophile circles, not sure if they have step up / step down versions, but worth checking... :)

They are much more expensive than the autotransformer version due to the raw materials involved.

But also use google. I found an interesting link like this one:

http://www.6moons.com/audioreviews/240_117/240_117.html



Best,

E