New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
shadorne ...

After 50+ years spent in a 100% commissioned sales career, my skin is about two feet thick. Your misinformed personal attacks and insults have no effect on me at all ... NONE. I hope you have a great 2018. Carry on ...

ehtoo ...

1. Release date will be in about two weeks if everything goes well. Stay tuned.

2. The binder is different. No oily mess.

3. This one really works ... and it works WAY beyond the price point for the product.

nkonor ..

Sorry, no 30 day trial. Unlike other products that may be returned for credit, like fuses for example, this one cannot be resold. If it were allowed, Tim would end up with a bunch of returned, half-full tubes.

Take a look at some of the stinking thinking in this thread ... and also the SR fuse threads being displayed by the very same negative souls. If they are so dishonest that they would denigrate a product without trying it, or knowing the effects even before a release date, would they be honest enough to give a fair evaluation of the product without using half of it, (which is more than enough to do an entire system), then sending the half tube back for a refund?

This is where the free market comes into play. The initial purchasers will be taking the risk. If it works like I and others have said, then word of mouth will make the product successful. If the consumer doesn’t like it, the product will fall out of favor and it will fail.

Read both of the SR fuse threads. The SR fuses are a great product currently being enjoyed by tens of thousands of consumers who are delighted with the results. And yet ... the naysayers are still spouting their nonsense about after market fuses.

I’m beginning to think that some of the Debbie Downers have ulterior motives in their attempted destruction of any new product. Could it be that they have their own tweak businesses like Geoff, or perhaps they work for another manufacturer and are threatened by innovators like Ted Denny and Tim Mrock? Or even more likely, they lead narrow, darkened little lives and get their rocks off by tearing at the seams of the dreams of others.

You can totally rely on one thing ... none of the genius naysayers in this and the fuse threads will have the testicular fortitude to step forward and be the first in line to buy it. In fact, they will stay in the background, continue to be drop-dead stupid, and remain as Negative Nellie’s and continue telling the rest of us what we don’t hear. They will NEVER buy the product even with all of the positive results being reported.

Geoff ...

Your reading comprehension needs work, Junior. In a previous post on page two I said this:

" 7. I tried the SR Black and the SR Blue fuses without the "Total Contact," and with it. With it was clearly the better option. Like the other applications to power cords and IC’s for example, the results are the same type of improvement in SQ. So go ahead ... paste the end caps of your fuses and you’ll get an improvement there also. It works on every electrical contact from your circuit breakers to your speaker terminals."

The very least you can do Geoff, would be to read the text before making your inane negative comments. Alcohol is a wonderful drug, isn’t it Sonny?

Frank
Frank
I think you come over as sincere. I do not see you hiding anything or have any reason to. You have more to lose if you are trying to pull a fast one(which I do not see that even close to happening).
Some people are scared or distrust even there own shadow. You can let that be their problem. I hope that doesn't come off as I am telling you what to do, it is just a viewpoint of mine. 
I wanted to say thanks for trying these enhancements out and keeping us up on them. 
Hope everyone is enjoying their systems.
^^^ marqmike ...

Thanks for the kind words. They are very much appreciated. 

Because I love music, I love this hobby. The closer I can get to the live performance, the better I like it. When I discover a product that gets me closer to the music, then I want to share the information. That's it in a nutshell. No ulterior motive ... just honest evaluations as I hear them. 

Frank
oreganpapa sez: "You can totally rely on one thing ... none of the genius naysayers in this and the fuse threads will have the testicular fortitude to step forward and be the first in line to buy it."   

Really?  It takes balls to buy a useless product?  Those that understand the psychology of expectation bias and the brevity of audio memory with regards to subtle micro-changes (if they exist at all), don't need balls to buy this product...they already have the smarts to see it for what it is - a waste of money.

I likely love music and audio as much as you do but I suspect you have thrown way more money at it than I..and you likely do not enjoy it more.
"You can totally rely on one thing ... none of the genius shills in this and the fuse threads will have the testicular fortitude to step forward and get an advanced science or engineering degree.  Their fluffy basket-weaving degrees are more than adequate to understand electronics."