New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
Guyz ...

Just for clarification: The Total Contact has been referred to "goop" a few times here. That’s not an accurate description at all. Its not a "liquid" ... its more like a powder in suspension. You’ll most probably get a little on your fingers during the application. It has the appearance as though you rubbed very soft pencil lead on your fingers. Same for the contacts that you paste. You end up with a dull looking grey material that completely covers the shiny connectors. No "goop." That’s what the other guys have. :-)

How hard is it to take off? Rubbing alcohol and a cotton swab or Q-tip will do the job in short order.

My friend Robert came over for dinner and a listening session last night.  We hit the 8-week point during the session. One recording really stood out ... It was an early stereo LP of Rosemary Clooney  singing good old American ballads. There was that super clarity again ... a see-through presentation with RC's voice sounding more articulate than ever. The Total Contact is truly good stuff. 

Dinner? Trout, mashed potatoEs and string beans. :-)

Frank
^^^ Yeah ... 23 skidoo and oh you kid. 

Frank

PS ... Don't take any wooden nickles. 
In 1981 or so when I was in a techno pop band in Hawaii, I played rhythm ukulele on a version of "Come Onna My House" we borrowed from Rosemary Clooney, and it was released as a 45rpm single in Japan. Great song…our singer did one side in Japanese and the other in English. Love Rosemary Clooney, and I often play the 45 for people as it's a great drunken dancing song…it has a drum solo (!) that I doubt was on the original version, although I don't remember the original. 
Perhaps this observation has been made; connectors are shafts and blades that fit snugly into tubes and sheaths and also are spades clamped down onto surfaces, all being metal that has been either drawn through dies, cast or machined and then surfaced with gold, rhodium, etc.  Just how perfectly round is the shaft or the tube that receives it? How smooth are the surfaces?  Under electron microscopy, you may just see there is little contact made along these mated surfaces relative to their total area, and that there are large peaks and valleys along the way. A contact enhancer that has some conductive property and the ability to conform to the irregularities mentioned would make up much of the area not contacted by the imperfectly made materials. Is this product so unbelievable as many would claim?  Not if you think about what it may achieve.....I imagine it acts something like solder in a different form.........