Dynaudio Contour 30 vs Confidence C2 comparisons

I've auditioned a pair of Contour 30, do think it has slightly more lower output. Just check out the frequency range 32Hz to 23KHz. While the 3.4Le  ranges from 35Hz-25KHz. 

From memory Dyns themself did mentioned the newer mid/bass unit can handle a bit more bass. Do check out the C20 review on Stereophile, the frequency plot does show a slight bump at the lower end. 

https://www.stereophile.com/content/dynaudio-contour-20-loudspeaker-measurements

Why don't you re-assess post moved? Never know what the room acoustic is like till you try. Probably will dictate what really suits. 

Given you have a top class stand mount, I would seriously check out some top notch pre. Pre with AV bypass and just let the AV processor do AV stuff. But that's just my 2 cents. ;)

I have C20 now and have no real complaint about bass or lack of bass. My biggest complaint of other speakers I've had is lack of bass. Mostly rock music for me but I can also put on Run The Jewels and just sit in amazement of the bass output. My room is of similar size to yours, 24'x20' with 9' ceilings. Haven't heard C1 but know a couple of people that face owned them and a couple of their complaints are very power hungry and higher volumes tend to cause the C1 to bottom out on bass heavy music. No problems like that with the C20. I believe Dynaudio gas mentioned this as an "upgrade" to the new Contour series. All that said my intention was to upgrade to C30 if I liked the C20 but I'm not going to do that after living with C20 for 10 months or so. They seem to provide all I need in my room. I'm fronting them with Naim 272/XPSDR/250DR. If more output is what you're looking for then C20 may be all need. 

I've heard the new C20s while shopping for floorstanders (they didn't have the C30s on display/demo) and they are pretty amazing. I think the new mid/woofers are much better than the older Confidence series drivers, and the new Contours also have the Esotar 2. I would definitely go with the new Contours over any of the older Confidence series speakers. They may be a "prestige" line up, but they are pretty long in the tooth at this point.

Thanks for the great insight everybody, much appreciated!
shingy, some day I hope to have a dedicated 2 channel pre amp, but that will have to wait. (money and space constraints are the guilty party) The av8802a has a very nice clean sound to it, but doesn't have quite the all around "robust" body of a serious 2 channel pre. When it comes down to it, my final decision will mostly depend on price/value of any deal I might find. I'm certain I'd be thrilled with either the C2 or Contour 30, but I have a couple concerns about both, to be honest. I've read (not sure where) that the newer Contour line has a treble that has a slightly more 'crisp' sound to it compared to the current Confidence range. I already have tinnitus in both ears, so I'm not sure that would be the way for me to go. Having said that, they have a much more modest appearance, and I think they'd be that much easier to set up properly. As for the C2 treble, I think its safe to assume it would be incredible similar to my C1.. although I've heard people say the C2 treble is even smoother, while others have disagreed with that. I know the Contours also use the esotar2, but the crossovers are not the same. I hear what you're saying about the Confidence range being long in the tooth nitewulf. I'm curious to know what Dynaudio plan to do about this in the (hopefully near) future. It'll be exciting, but well above my budget I'm sure! And to your statement, jonmc138, I can attest to the C1 being a bit power hungry, and I have also bottomed them out ONCE! I was watching the beginning of the first Guardians of the Galaxy during the scene where Star Lord gets taken by the space ship as a young boy. I've learned my lesson after that, so now I take the time to MAKE SURE I HAVE MY CROSSOVERS SET PROPERLY LOL!

@scaf_007

I too started with an AVR to drive by Dyns (Audience 70 back in the days). But the sound was flat as a runway. So, sold both the AVR and Dyns and updated to to my current set of speakers and a newer generation AVR.

Still it sounded okay but nothing I would call Earth shattering. So I started trialing a brute power amp at 500wpc and AVR as pre. Certainly there was bass slam but no mids and muffled highs. 

Further updates lead me to try two pre/power combinations,  one was a tube pre and 300wpc power from same manufacturer. I could have stayed there. That had a wonderful SQ, tubey mids and with meaty lows from the solid state power amp. When a Gryphon integrated came up for sale I hadn't look back. This amp would stay for a foreseeable future. It has so much control over the Dyns, micro details and refinements. Yet when the source demands a huge push of power to the speakers, the Gryphon more than deliver. 

My thoughts are a mid range preamp can do wonders with your setup. when compared with an high end AVR. Granted it is not a priority right now. : )

Actually, I too contemplating in going up to C2. But room size is not ideal for placement. Too close to my listening position. So I am following your thread with interest. Cheers.