Measurements are a tool and just like any other, you are free to use them as you like. With them, you can certainly gain inference on how you might set up a pair in your room.
The exmaple of the B&W 802D2 isn't know to have linear dispersion across the audio band due to B&W's design which pushes the mid-tweeter crossover point well out of the mid range. With judicious setup and in room response measurements, I've seen them put in one very nicely done in room frequency response that belies its measured response.
One example is having the phase and impedance plot of a loudspeaker system can give you insights to what amps might be unsuitable or in the least not an ideal pairing.
As for this new Kanta 2, bass response has a quick fall which is certainly in place to keep distortion low. Deep bass will be missing and full range performance will need the assistance of a sub. Impedance does dip rather low at 100hz at 2.9Ohm and I would pair this speaker with amp that is known to be stable at that impedance range. Treble response is slightly shelved. Other that the toe in work, it shouldn't be to hard for room placement and I would think a good solid state amp that can provide current would work best. There are certainly enough options out there to fine tune the final result.
I do think they will be overall as good as the Electra, but they are a bit different overall.
The exmaple of the B&W 802D2 isn't know to have linear dispersion across the audio band due to B&W's design which pushes the mid-tweeter crossover point well out of the mid range. With judicious setup and in room response measurements, I've seen them put in one very nicely done in room frequency response that belies its measured response.
One example is having the phase and impedance plot of a loudspeaker system can give you insights to what amps might be unsuitable or in the least not an ideal pairing.
As for this new Kanta 2, bass response has a quick fall which is certainly in place to keep distortion low. Deep bass will be missing and full range performance will need the assistance of a sub. Impedance does dip rather low at 100hz at 2.9Ohm and I would pair this speaker with amp that is known to be stable at that impedance range. Treble response is slightly shelved. Other that the toe in work, it shouldn't be to hard for room placement and I would think a good solid state amp that can provide current would work best. There are certainly enough options out there to fine tune the final result.
I do think they will be overall as good as the Electra, but they are a bit different overall.