Eminent Technology ET-2 Tonearm Owners

If nothing else I can stare at my Garrard with Ortofon while I listen to my VPI with ET II.

If me Harry, I would first put your ET II on the Garrard using the quick install technique I described; then you can hear for yourself what the Garrard (the table itself) brings to the table. Apples to Apples.

Anyway, that is what I did with my Jean Nantais Lenco. It actually came with the Dynavector tonearm. Jean Nantais’ preferred tonearm. An impressive, freaky looking thing that Dyna tonearm. He was surprised when I sent him pics of the table with the ET 2.5 on it. hah hah

So my JN Lenco table is just sitting there, can be stared at as you say. It doesn’t bother me, not using it, because unlike digital DAC’s and CD players, it holds its value.....these days better than my oil stocks !
So I haven’t sold it off yet. Record players are so in vogue.

IMO - What you are doing Harry is a healthy audiophile exercise. I was happy enough with my at the time TNT TT, but My JN Lenco Idler table upped the game in a couple areas and forced me to make improvements to the modded TNT (adding thread), and also my SP10 DD setup (better isolation). So for a time the JN lenco, with the 2nd ETII on it, became a reference point for me. It’s been quite a number of years now . The JN table can be sent to him in Ottawa to have the latest updates made to it, but the delta that exists with the Verdier is just too large, for me, so I have not bothered doing it.

@ct0517 
Thanks for the encouragement Chris.
"What you are doing Harry is a healthy audiophile exercise."

Healthy!?  Healthy!?  Sure not healthy for my wallet :).  But, damn, it's fun.  I'm very anxious to get the plinth and have the TT refurbed and mounted.

Of course for a guy with a Verdier cost is no object.  Tee Hee.
Cheers,
Harry

Well no big surprise that I have a alert on ET2 on ebay ;)))))))
but my problem is that I only need the arm (second ))))
no pump 
by the way I have a  wise air pump left over more or less new 

Moved the air pump up in the loft with tank and 10 m hose down 
runs it at 14 psi and the wise pump not able to do that job. so now I use a big ugly and noisy air brush pump. Cant hear it and air stream very stable The long hose help a lot i think. 

But thing the micro seiki need to come up first.so all safe for some time ;-)
All part for the test rig ordered. 
planing to start disassemble and CLEAN the arm next week. 

Any in here with the high mass arm ?? 
any improvement on 12-10 comp cartridges?? 

I ended up using all 40g leads on a 10g cartridges and with 2.5 g tracking
the lead mounted on the outside of the I-beam and the rood pointing inwards the I end up mid on the I-beam scale 

shfinne -
I ended up using all 40g leads on a 10g cartridges and with 2.5 g tracking
the lead mounted on the outside of the I-beam and the rood pointing inwards the I end up mid on the I-beam scale.

As kids, the teeter totter taught us good physics lessons. Remember trying to ride it with an adult. They had to sit up in front of the seat closer to the midpoint of the beam. It was no fun this way. Even worse when they did sit in the seat, were in control, and were nasty and jumped off quickly, allowing us to fall to the ground fast and hard.The teeter totter is the most fun when both riders are on the end of the seats, same weight..

Option One

Start losing the bodies (lead) off the end of the plank, to get to the highest number on the I Beam. This is documented in the manual. This will give your cartridge the highest vertical inertia.

Option Two - preferred.

Get the new long I beam, and with the help of physics, you will need 1/2 the lead or less, to attain the same result.

My XV1 is 12.6 grams.

vpi - cost is no object.

Harry -the vintage Platine Granito is pure machine. Every part has its purpose. There are $25k Garrard setups being sold. How much of that cost - percentage - is in getting that finished furniture/car look on those plinths ? Sorry but could not resist .....

Design is important. But when it comes to TT setups. A well setup less cost TT can out perform a more expensive one that is not set up right. Its not plug and play as we know. But in the end based on my experiences, and in all my hobbies not just this one, the better design has the most potential when done right.