It is really difficult to get good photos
Folks who can have a real talent!
Folks who can have a real talent!
Stylus inspection with USB microscope
Regarding the removal of the plastic lens guard. ... it was harder than anticipated. Fremer recommended squeezing with your thumb and fingers, going around the circumference until the lens guard comes off. That method did not work for me. There must have been a well applied layer of super glue holding the lens guard on. What did work for me is putting the usb microscope in the freezer for 24 hours. When I took the usb microscope out of the freezer, I put the microscope on a counter and let the plastic part hang over the edge. I then lightly tapped the plastic lens guard with a hammer. It popped right off with no damage to the body of the microscope or the lens guard. |
http://https//www.bestadvisor.com/usb-microphones
|
https//www.bestadvisor.com/usb-microphones
Report this |