Tube Friendly Speakers - Down to 30Hz - $3000?

Tvad,

One thing my wife and I have found with squatty flat-top speakers (like the Altecs I mentioned) is that they in effect raise the floor up thirty inches or so. They're not so tall that you can't put things on them, and when so decorated they blend into a room better than their width would lead you to expect.

I've been scratching my head about reasonably narrow, deep speakers with decent bass and smooth impedance curves, and Fried and Buggtussel come to mind. I was a dealer for the latter company, which is now sadly out of business. Both use transmission-line enclosures. While both have models rated at 4 ohms, with the Buggtussels at least it's an honest, resistive 4 ohms - still a relatively easy load to drive.

Another possibility is SP Technologies. The Timepiece 2.1 meets all of your requirements except efficiency. I like the two-way with waveguide approach.

Soliloquy makes tube-friendly speakers. I'm not real familiar with their lineup, but recall liking what I heard from one of their larger models at CES a few years ago.

How close to the nearby walls do you anticipate placing the speakers? Can they be toed in? Given that the Tyler PD speakers failed the WAF test, can you give us an example of a speaker that would pass, even if it doesn't meet your other requirements? If it turns out that you can't "have it all" at that price, in what area would you be least reluctant to relax your requirements a bit?

Duke

How close to the nearby walls do you anticipate placing the speakers?

Approx 3 feet from the rear wall (no farther into the room), and about 2 feet from the side walls.

Can they be toed in?

Yes.

Given that the Tyler PD speakers failed the WAF test, can you give us an example of a speaker that would pass, even if it doesn't meet your other requirements?

She has no problem with the VR4 Gen III HSE, Silverline Sonata III, Reimer Wind River. Essentially, slim profile and deep is better than wide and shallow...and she would like nothing taller than the VR4, which are about 44".

If it turns out that you can't "have it all" at that price, in what area would you be least reluctant to relax your requirements a bit?

Price...within reason.

Reagarding amps Tvad,

I heartily suggest you choose the Almarro A318B over the A318A. I've owned both and there is no competition between the two. The "A" has noticeably rooled off highs in comparison and lacks the resulting clarity and air of the "B". I also felt the bass was significantly better with the "B".

BTW, both amps do far better(at elast in my home) with 90-94dB speakers than 97dB.The higher efficiency speakers seem to not allow the amps enough output to get into their preferred working range before things got too loud. As a result, the sound was never really as fleshed out and rich as with 90dB/4ohm speakers. The lower-eff speakers turned out to be a glorious match with the amps, though.

The A318B is a fantastic amp if you are looking for accurate amplification. It was far moe "literal" than my much more expensive 300B monoblocks and PX-25 amps. Not dry or colorless, just very accurate without embellishment.

The Reimers are front ported so placement within a few feet of the wall is not a problem. One of the postings above mentioned that deep bass and low wattage was not meant to be. I suppose that it would depend on the amp I am continuously suprised at the quality bass I get with the 18 watts Lamms and the Tetons. This seems to be the hardest thing for a speaker to get right and IMHO the Tetons nail this. There may be speakers out there that project a different soundstage or provide slightly more resolution but most all of them sacrifice in the low end. I have thought of upgrading from the Tetons but I do not want to sacrifice the deep, tight, integrated bass and so far have not heard a speaker that comes close without costing three times the price.

The JM Reynaud line would be worth looking into.

They are all right around 90dB and have flat impedance curves that hover around 4 ohms.

I drive my Offrandes with 13 wpc to satisfactory levels.
Offrandes and above are also rated to 30hz, although when I had mine measured once they were -6dB down at 30hz and 0dB down at 35hz.

Used these would fit the bill or move up to Concordes