TIME'S CELEBRATION: ORTOFON FIRST CENTURY ANNIVERSARY ! ! ! ! !


Dear friends: This is a true time's celebration for all audiophiles over the world: 100th ORTOFON ANNIVERSARY.

ORTOFON needs no presentation but stop the press and stop/delay your next cartridge buy:

https://www.ortofon.com/mc-century-p-863?utm_medium=email&utm_campaign=HiFi%20NL%20May%202018&am...


https://www.ortofon.com/concorde-century-p-862?utm_medium=email&utm_campaign=HiFi%20NL%20May%202...



Btw, @mikelavigne as always your comments are welcomed.


Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
Ag insider logo xs@2xrauliruegas
Dear @daveyf : Sorry for my ignorance but what do you mean with " zip for output?.

Appreciate you can explain me in some other words that my bad english can understand.

Thank's in advance.

R.
With the appropriate phono preamp the low output is not an issue - have used the 30 year MC70 with only .125mV with no issue what so ever.  

Inquired this morning about availability - no news about this yet - pricing predicted to be $12K - E10K  - Looking forward to this one.  

Good Listening

Peter
Dear @pbnaudio : Now I understand the davey post. You are rigth that was never a to serious issue.

Good active SS designs is all what we need for very LOMC cartridges like some of the Ortofon models but even through top SUTs its quality level performance is second to none.

I used the MC2000 with excellent results even that's output level is only 0.05mv ! !  

Always is an advantage to have wire winding coils at minimum especially there because as more length on the coil wires as more degradation can comes.
Obviously that does not exist a perfect cartridge and Ortofon are not, always exist trade-offs but if the main target in a cartridge design is a little different from busine$$ then designers looks for a better equilibrium as Ortofon that in its top LOMC cartridges never choosed for a little higher output.

Rigth now I'm enjoying my re-borns special MC 3000MK2 with an output level 0.125mv and its quality performance is just gorgeous where we almost can't ask for more and this is an Ortofon  vintage design older than the one you name it and better than the 70. My special 3000MK2 can even the performance of the MC A90  and surpass easily the very good Jubilee or the 7500.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
Output of the Ortofon MC at 0.2mV is just too low. It will require a tremendous phono preamp, such as John Curl designed JC3+. Very low output lacks the necessary balls and drive in most systems.

For MC cartridges, ART9 at 0.5mV is the sweet spot. 
Dear @invictus005:  The " balls " are there and plenty only waiting to " handle " it in adequated ways.

Everything the same a 0.18mv always will performs with better highquality performance than one at 0.5mv. No doubt about.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.