New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
@oregonpapa It seems like you have appointed yourself as the moderator and now you are deciding who should be thrown out.  I don't think that's how it works, bud.  I've been lurking on this thread, and I read a lot of it.  Now, I'm commenting, so does that mean I should be removed too, because I am a "drunk who staggers in from the pub down the street"?  

+1 for @amg56 calling this out as a marketing thread.  That IS what this is.
oregonpapa OP2,217 posts06-08-2018 9:18amAMG ...

Sorry your nose is bent. 

What you think of as "deceit," I, and others, see this thread as a sort of social club for those who are TC enthusiasts. Its kind of like a local pub where like-minded folks meet. 

Every once in awhile, a drunk staggers in from the pub down the street and starts raising hell here. As they start to act up, or vomit on the floor, we just toss them out on their ear. Unfortunately, some don’t get the message and need further tossing. 

You’re sort of a newcomer who staggered into the pub, and right away, you start telling the regulars and the barkeep how you don’t like the barmaid. Well, as I said, there are other pubs down the street with different barkeeps and different barmaids that you might find more to your liking. Go there if you’ll feel more comfortable. 

aalenik ...

Brian was a friend of mine as well ... and you are spot on in your assessment of him. Brian and I had a blast one year at CES trying to get some of the rooms to use a little of his X-treme. We were successful in only one display, that of a major manufacturer ... and it made a significant improvement.

Frank
soundermn ...

Thanks for stopping by the pub.

As long as you don’t start raising hell in the pub and try to burn it down like a few arsonists have in the past, you are welcome here. And no ... I am not a moderator, only the person who started the thread, and one who wants to keep it on track without personal attacks or attempts to destroy a fellow businessman who is trying to introduce a new product. For clarity, I humbly suggest that you start on page one and read the thread in its entirety with an open mind. Hopefully, you’ll gain some insight into what I’m talking about. 

Frank.
Brian’s wife was kind enough to let me carry on with part of his legacy, the Tourmaline Gun. Too bad Quicksilver Gold and Liquid Resolution disappeared.
Why is it that so many GON forums are for the purpose of conversation concerning various audio products? Are they also in violation of the forum "code"? What purpose are the forums if one cannot write about a product? There are 1000s of forums concerning products, why is TC so different? I’m sure the same denigrators of this forum feel the same way concerning SR fuses, SR cables, SR duplexes, SR HFTs, etc. etc. No one is twisting one’s arm to agree or purchase SR products or anyone else’s products.

I am happy to read of real life experiences with products by owners of them. Unfortunately, audio systems and acoustic spaces do not respond similarly in one circumstance as in another which can often be attributed to synergistic effects between products (or lack thereof). My back-up EAR 890 amp works great on Legacy Signature IIIs and terrible on Legacy Focuses, attributable to the latter’s low impedance in the bass.

If it wasn’t for Frank, I would not have ventured into purchasing SR products, especially the duplexes, fuses and HFT system.