Spay for CD

for what it is worth i copied this from another AG thread.  

Thanks guys here's the response from Vin at Nordost

Dear Glen,

Thank you for your inquiry. Actually, one of the demonstrations we do at trade shows is to spray a CD with ECO3 and show the audience the improvement it makes. It is quite effective in lowering the noise floor and improving the dynamics of the system. When you use it on a CD you should apply it only to the label side. Even though it is water based, it will leave a slight film over many uses which is not a good thing on the information side of your disc.

I hope this is helpful.

Best regards,

Vin Garino
Nordost

There is a whole ritual I perform for the CDs in current rotation. It is rather effort intensive and time consuming. I will absolutely not listen to any CD without a minimum amount of treatment. The Full Monty includes home freezer two days, full coloring of the disc, including data side, black tape stiffeners on label side, Liquid Resolution spray, and some other things that are beyond scope and better left unmentioned.

Pop quiz: do they really use mold release compound in the manufacture of CDs or is that just an Old Wives Tale?

https://www.uline.ca/BL_7402/Staticide-Spray

What risk trying this home antistatic products on CD and cable surface ?

Is it the same product use in the most expensive audio anti statique spray ?

https://www.walmart.ca/fr/ip/Endust-259-000-Antistatic-Premoistened-Wipes-for-Electronics-Cloth-5-1-...

And what about this one, is this risky to use on CD ?

What I found to work best for me to clean, polish and remove static and fine scratches, on both CDs and DVDs, is a light spray of my Martin Guitar polish, wiped dry to a polish on the data side of the disc.
I discovered this when we got some DVDs from the Library and found that some of the discs were so dirty, scratched and smudged that they wouldn’t play, without skipping or locking up. After using the guitar polish to clean and polish the discs, not only did they play through, the picture was very bright and clear.
I started using the same polish on the data side of my used and older CDs, with the same results.
Probably would be frowned on by some of the tech-buffs, but it works for me...Jim