2. amps-preamps
  3. 136862-1288

Pre and Amp Suggestions

Given the way these things go, I’m almost afraid to ask this question but here goes: I’m finally at a place where my front-end and speakers are at “destination” level-at least for me....for now.  My question is where and what to upgrade between these two extremes. The speakers in question are Revel Studio 2s which I love, and the front-end dac/streamer is the Lumin T1 ruining Roon. The Lumin feeds into an analogue bypass section (no digital conversion) of an Anthem AVM60 going in turn to two 200 watt mono channels of a Sherbourn 7300. In trying to answer my question, I would appreciate keeping to the following parameters:

-no suggestions of other speakers or front end gear, I’m in a good place where I am right now.
-no suggestions of power conditioners, cables etc. Let’s just stick to the gear.

Just looking for pre and amp recommendations (or really good SS integrated amps). The sound right now is quite neutral, but perhaps a little lean but very revealing. I’m not looking to drastically alter the sound or play louder, just looking for more of the “good stuff”, resolution, staging etc. Might consider a tube pre or hybrid but really have no interest in an all tube power amp or massive class A space heater anymore. Ok let the games begin!
spinaker01
spinaker01 OP
293 posts
 
I have been following WCSS thread over the past year or so. The Luxman has been getting rave reviews but I can’t get past the 70s styling. (I know shallow). The JRDG rec of the 625s would not leave anything for a preamp, however, I have been keeping my radar spinning for a Continuum S2, which along with the Pass INT 250, and ML 585 are my top three integrated amps I think in this range. Of these three, which does the Collective think would be the best match for my Revels?
bpoletti
1,004 posts
 
Call Keith Herron at Herron Audio to see if he will give you the package deal of a lifetime on a VTSP-360 preamp and pair of M-1 mono amps. Outstanding performers at any price, a steal for $10K.
amb3cog
17 posts
 
Paul at PS Audio mentioned taking people's gear in trade, and giving full retail for it. When you buy from them. I don't know what the stipulations are, but they do in home trials too. Where they pay shipping both ways. Might be worth a call to see what they can do for you.
Post removed 
atmasphere's avatar
atmasphere
7,068 posts
 
For the amps I would do Pass Labs.
For the preamp I would go with tubes- that is if you want to reduce that 'leanness' which is a common complaint with solid state.
We make balanced tube preamps, so does BAT, ARC and Aesthetix and there are a few others. IMO/IME the ARCs tend to be a bit leaner but you may still want to do an audition.
The Pass is balanced of course, so it can take advantage of a balanced input. The reason to go balanced is that if it is done correctly, there is no going back to single-ended because if its done right, the interconnect cables no longer editorialize on the sound. Balanced lines were created for this very reason. To really take advantage of this capability though, the preamp and amp should support the balanced standard. The Pass Labs does, as does the BAT and our stuff but the ARC and Aesthetix do not, which means you may have to try different cables with them to optimize the playback.
Good luck!
More to discover