I want to use an OTA HD antenna...

The OP is asking about a broadcast, over-the-air, HD antenna, not about satellite (and frankly not about cable either).

There is no current broadcast 1080p content: 1080i, yes. My profession is network TV production.

OP, no CRTs have 1080p...(some have 1080i).

I have no specific recommendation for an HD antenna, or for an HD tuner, so I'm out of this discussion.

Good luck and happy viewing!

Why did you ever enter? I say again, Dish Network is doing 1080p PPV. Need the 800 #?

Dish PPV is not broadcast content (programming originating from a broadcast network: ABC, CBS, NBC, Fox or PBS).

Dish PPV is offering movies and other non-broadcast content in 1080p...see this Dish TV press release regarding 1080p programming.

If you read the full TurboHD channel line-up, you will see there is no network television content listed (ABC, NBC, CBS, Fox, PBS). Dish offers the opportunity to add local HD network channels, but these will be in 1080i, because no network is yet broadcasting in 1080p (and there is no programming being delivered to the networks in 1080p because the network HD delivery requirements specify 1080i at present), as I explained earlier.

But, all this discussion of Dish PPV and 1080p is moot, because the OP owns a non-1080p CRT television, and he is asking about over-the-air HD antennas, not satellite or cable service.

Gmood1, Tvad and Zieman,

Will the digital tuners replace the need for an OTA antenna? I have both DirecTV and extended basic cable.
I've been contemplating switching to Fiber-Optic(Surewest) since the phone and computor service are with that company. I could purchase two Tivo HD DVR's with Lifetime Service and be ahead of the game. What do you think?

In my area, and depending on ones location, the biggest majority of the populus needs a 'piggy back' ant. (two directional ariels), each pointing in differing directions, as all but one or two station are in the same general area. SE. The other major affiliate is NNW.

Beyond that apparatus, a 'rotor' type antenna + digital tuner would be my pick. The rotor will turn or point the aerial in the exact direction of the broadcasting station via remote control. Usually that device is a small box with controls for memory positioning of most or all the local broadcast towers. Naturally a rotor antenna is a powered motor driven unit, so bare that in mind.

Once set for each station, just punch in the ch. and then switch the tuner to that ch. I'd suspect now or very, very soon, these devices will be all in one units, and not require the double moves of selecting both station direction for the antenna, and the ch on the tuner as well.

Check it out.

Otherwise if all the affiliates are in the same area, only your standard type (unidirectional) antenna would be needed. Then just a proper height and compass will be needed…. Call the local ch in your area and they’ll tell you where they planted their broadcasting towers so you can aim your aerial without the need for another person to yell when the ch is coming in good… although having another about when dialing in the antenna is a good thought in any case.