I want to use an OTA HD antenna...

I have a standard definition DISH network DVR on my Panasonic Plasma. The channels I watch most are not HD, so can't justify paying to change the DISH and receiver and paying more per month! I would like to also have over the air HD local channels by using an antenna. Can I just plug the coax from a roof antenna into the back of the TV and use a difference source (TV 2) or do I need to do something else? I see talk of amplifiers and splitters and other stuff. What do I need to do exactly? I am about 20 miles from town.

Your TV needs an HD decoder for the cable coax/splitter technique to work.

If your Panasonic Plasma has a built in HD decoder, then try connecting your DISH coax feed directly into a different source input on your TV and see what happens.

If it works, then you can use the coax/splitter technique for your TV.

Lefty, yes you have the right idea. Your plasma most likely has a second coax input and HD ready. Unless it is a monitor and not a television per say.

You can buy a self powered antenna if you so choose. Or you can add a inline amplifier if necessary. 20 miles out isn't that far. Use the link I gave above to see how many channels are available in your area. You could in the future add additional antennas to the first one and have them to piggy back one another facing different directions in order to maximize your reception.

OTA digital is very directional..so your antenna must be pointed in the direction of where the signal originates to get the best signal strength.

You should be able to find a pole at Lowes or Home Depot. You could easily mount the pole in the attic using claps to your beams. Or in some cases you can get away with using an existing dish pole if the circumference of the pole is small enough.

Get an antenna that is made to be piggy backed. Radio shack carries one that does this for around $30. You'll need a pole of some sort. The antenna has claps for mounting to a small pole.

If you plan to use it with more than one or two TVs..I would get an inline amplifier/splitter or a self powered antenna/splitter.

I looked in my manual, and on the back of the TV. I have DISH connected through S-Video and composite plugs, and I do have an available Antenna-in co-ax connection. The manual has the external antenna connected to the cable box or the DVD, not directly to the TV. Do I need to do that, or can I run it directly into the Antenna-in on the TV? Do the roof mount antennas work a lot better than the table top ones I see for sale? For 20 miles, do I need an amplifier? Do I get all this at Radio Shack?

The manual has the external antenna connected to the
cable box or the DVD, not directly to the TV. Do I need to do
that

I don't believe so, no.

...or can I run it directly into the Antenna-in on the
TV?

Yes, you should be able to do that.

Why not first try the coax-direct method before you take the next step of
researching and buying an antenna, amplifier, and whatever else is
recommended?

Shouldn't take more than five minutes to disconnect the coax cable from your
DISH box and reconnect the coax to your TVs antenna-in. If it works you're
golden, and all you need is a splitter and some additional coax cable. If it
doesn't work, then on to the antenna plan.