2. speakers
  3. 137841-98494

How do you move HEAVY speakers with sharp spikes without lifting?

I have large (175 pounds each) speakers with sharp spikes placed on carpet. I would like to be able to move them a few feet by myself to tweak their positions but lifting them is obviously not an option (I can't even lift half their weight).

I currently use a convoluted method involving tilting them over about 30 degrees, slide a board under spikes on one side, and then repeat on the other side. The speakers almost toppled over the other day which would damage them.

I'm aware there are non-spike alternatives but do not have the money to spend on these options. Any clever moving methods out there? 

Thanks!
wahoospiff
stringreen's avatar
stringreen
5,112 posts
 
Yup...I had to do that with mine.   Go to Home Depot and get "SuperSliders"...  they come in a package of 4.   There is one kind for hardwood flooring, and another for carpet.  Put these under the spikes of the speaker....I would put protection between the spike and the slider.  Move the speakers slowly and carefully, but you will be amazed and how easily this is accomplished....(a little grunt, but very doable)
Post removed 
prof
1,741 posts
 

I had to move big speakers quite a bit.  Herbie's gliders did the trick.
maplegrovemusic's avatar
maplegrovemusic
981 posts
 
I use super sliders as well . They might get punctured and only be used for the speaker moves . $8 at Home Depot

mrdecibel
1,244 posts
 
" How do you move HEAVY speakers with sharp spikes without lifting? "        Very carefully ! I typically find the best spot ( within an inch or two ) for the speakers, use painters tape to mark the carpet ( in this case ), and go from there. With that weight, get a buddy to help ? Enjoy ! MrD.
More to discover