Magnepan 3.6 or 3.7

I bought new 3.6 in May of 2010. A few months before the 3.7 came out.Older 3.6 could be as old as built in 1999.I sold my 3.6 through my dealer on consignment and they sold for $2000. (I bought 20.7 Maggies this year.)Either way the3.6 or 3.7 is going to be a good speaker.One point is: How far are you from MInnesota? Say you need the 3.6 reglued? can you do this or send them to Magnepn. If you are in Australia.. buy the 3.7 !!!!! If in Iowa, go for the 3.6 IF you want to save money. The Mye stands alone are worth $500 easy.So it is a toss up! If you have the money I say buy the 3,7.The ’i’ upgrade you can get later is you are close enough to Minnesota to afford the freight

Thanks everyone for your feedback.  I've decided on the 3.7s, based on your responses.  I live in Iowa so it's easy for me to drive them up to the factory for the upgrade should I choose do do so.

Once again, thanks!

Hey! Great. Good luck.

I have never heard of 3.6's delaminating.

The adhesive was changed in June of 1987 on the IIIa and  the issue put to bed

But if you put the Magnepan's  in a sunny room, or play at over 100 dB all bets are off.

Magnepan has switched glue twice. The first time it cured the problem of delamination due to excessive UV light. But the problem of delamination due to excessive moisture remained until 2005, when Magnepan switched to 3M 30NF. It is available from them, or you can buy it locally.