@captbeaver - The 7T are COMPLETELY different speakers than the older 10T. The 7T use soft-dome ring radiator tweeters and a paper cone midrange. I would probably put the 7T as a "Sonus Faber" type of sound. I think the 7T would really shine with a very high resolution amplifier, but of course it's all up to your taste. There are a hundred different directions you could go. It's difficult to say if the Parasound would mate well with the 7T or if it would be too warm (unless you like that slightly warm character).
Time for a Pre change? Need the wisdom...
I bought a mac C 41preamp and a pair of AA 10T’s.
There is a harsh edge riding on the high end... I cant get rid of it. I have changed everything out and still cant remove it...... I have the opportunity to buy a Parasound A21 and a P6.... What’s the feeling here on this era of Mac? I have had people I respect and in the business prefer the Parasound over the Mac.
Is the Mac on the bright side and is the P6 in the same ballpark. I have emailed AA about the harshness... maybe xover or maybe bad tweets? It’s killing me. I feel if I clean house (amp- pre) with new equipment I will have a better chance at getting to the relaxing listening days again.
All opinions are welcome... I have a thick skin as I know everything... lol
There is a harsh edge riding on the high end... I cant get rid of it. I have changed everything out and still cant remove it...... I have the opportunity to buy a Parasound A21 and a P6.... What’s the feeling here on this era of Mac? I have had people I respect and in the business prefer the Parasound over the Mac.
Is the Mac on the bright side and is the P6 in the same ballpark. I have emailed AA about the harshness... maybe xover or maybe bad tweets? It’s killing me. I feel if I clean house (amp- pre) with new equipment I will have a better chance at getting to the relaxing listening days again.
All opinions are welcome... I have a thick skin as I know everything... lol
- ...
- 34 posts total
captbeaver Your AA 10T’s at 86db and with an impedance graph that looks like this, I’m with Stereophiles John Atkinson’s opinion of: "Its plot of electrical impedance (fig.1), however, reveals that it sucks quite a lot of current from the partnering amplifier to achieve that sensitivity. The magnitude drops to 3 ohms or below in the midbass and mid-treble, and is coupled with a demanding electrical phase angle some of the time. https://www.stereophile.com/images/archivesart/A10fig1.jpg I’d say amps of >100watt at 8ohm that can come "close" to doubling that wattage for 4ohm and again 2ohm. This will keep the bass rich and full and take away from the harshness (mid treble above) you hear probably at 3khz (3ohm) that the present amp/s you have are having trouble driving. eg: plus/minus 15% or less 8ohm=100w 4ohm=200w 2ohm=400w This will do current to maintain what JA said " that it sucks quite a lot of current from the amp". Cheers George |
- 34 posts total

