Turntable got absolutely crushed by CD


Long story short, i've just brought home a VPI classic 1 mounted with a Zu-Denon DL103 on JMW Memorial 10.5 with the appropriate heavier counterweight. Had everything dialed in..perfect azimuth, VTF, overhang, with only a slightly higher than perfect VTA. Levelling checked. All good. 

I did a comparison between the VPI and my Esoteric X03SE and it's not even close. The Esoteric completely crushes the VPI in all regards. The level of treble refinement, air, decay, soundstage depth and width, seperation, tonality, overall coherence is just a simply a league above from what I'm hearing from the VPI. The only area the VPI seems to be better at is bass weight, but not by much. 

I'm honestly quite dumbfounded here. I've always believed that analogue should be superior to digital. I know the Esoteric is a much pricier item but the VPI classic is supposed to be a very good turntable and shouldn't be a slouch either. At this point I feel like I should give up on analogue playback and invest further in digital. 

Has anyone had a similar experience comparing the best of digital to a very good analogue setup?

Equipment:
Esoteric X03SE 
VPI Classic, JMW Memorial 10.5, Zu-DL103
Accuphase C200L
Accuphase P600
AR 90 speakers

Test Record/CD:
Sarah McLachlan - Surfacing (Redbook vs MOV 180g reissue)



chadsort
Analog playback is fraught with peril! A lot of experimentation is necessary! TT + tonearm + mat + cartridge + phonostage vs. CD player/transport/DAC. I said back in 1978 that I would get rid of my LPs if Sony/Philips could perfect their digital system. Alas ...
I have heard some very good digital sources in my day and I still have not heard any digital rig produce the subtleties deep in the grooves of good analog.  Digital is getting much better but still falls short of great analog.
@dill : You sir are right! Phono stages vary widely in SQ! As do cartridges! Add in tonearms and the variables become too much for the less dedicated! 
I took a look at the very detailed brochure on the C-200L that can be found at hifiengine.com if one is registered there. It appears that for low output cartridges the only loading choices are 10 ohms, 30 ohms, and 100 ohms. While the recommended load for the Zu/DL103, at least in its MkII version, is stated to be "200 to 300 ohms, or as needed to get the phono preamp to mate well and make you happy."

Several of the sonic characteristics you referred to as being crushed by CD seem to me to be consistent with excessive loading of the cartridge (i.e., load impedance that is too low).

Probably other factors are also contributing to the issue, such as those that have been mentioned by the others. But I wouldn’t be surprised if excessive loading is a major factor.

Regards,
-- Al