How to pre clean a very dirty LP before Ultrasound Machine?

"Drumbeat, your US cleaner cannot clean 750 filthy records unless you want to change bath at $3 or $4 a pop. As bad as you state condition of records you cant start with agitation. You have to blast it off,if scared of steam you need to break surface tension with chemical let soak flood with distilled water then lightly vacuum until you can use a brush and finally get it in your machine.Living in NYC (my brother lives there) may not have DIY access. You could order vpi wand, $15 shop vac and f****in duct tape, a $10 lazy Susan to spin record. Music direct has chemical and wand"


Yes- I bought a steamer. Ill do the Steam blast first and then to the US.
Any word on how to do the steam?
Anything in the water(alcohol etc.) or just water steam?

Any word on steam temperature and distance from LP?

Thanks!

I don't know if you can control temp, try to keep it a couple inches away. I use distilled water in steamer. There are you tube videos out there. I'm not trying to make it complicated but you still need a way to remove dirty steamed water. Only way I know is to vacuum. i would think a cloth rag will scratch album and you would need a lot of rags. Vacuum wand may scratch also but if you flood album with distilled water with spray bottle over steam water and vacuum lightly puddle of water not record your odds are better for less damage. This process is going to be a pain in the a$$ but there is a clean pristine record under all the crap.

Forgot to add apply your choice of enzyme cleaner to record with spay mist bottle and let sit for 5 or 10 minutes before steam. 

Which Enzyme do you recommend?