smrex, I probably should not respond to your last question, because I am not sure I visualize what you are doing. Your tonearm is also a VPI, correct? It must be interchangeable with other tonearms of your choice. At this price point, it is hard to imagine that would not be so. Therefore, there must be a way to correct the P2S distance. By the way, also, "P2S" refers to "pivot to spindle" distance, nothing to do with stylus overhang. Perhaps my use of that abbreviation was confusing. With the Feickert, you don't have to think twice about stylus overhang per se, once you set P2S correctly and then adjust the cartridge in the headshell such that the stylus tip sits within the crosshairs and the cartridge body lies parallel to the lines parallel to its sides. I hope that helps.
Question about how to use Feickert Protractor
Greetings from Oregon,
I'd been following the discussion about the Feickert Protractor and finally decided to order one. I'd been using the GeoDisc for setup, and I wanted something a little more precise. I have been working with the protractor this evening, and the directions on the second step are not entirely clear. The first step is easy enough - set up the protractor with the gauge pin over the pivot point (easy to find on a unipivot) and adjust the cartridge to the bulls eye in the geometry you want (I'm using Baerwald). Moving to step two things become unclear
My first question:
Step 2 says "..we don't need to aim over the pivot point anymore. Please rotate the Protractor so that the stylus tip touches the cross hairs at step 2." The picture shows the stylus sitting right on the target. Correct me if I'm wrong, but that's not physically possible. The cross hairs at step 2 are a fixed distance away from the cross hairs at step 1. There's no way to rotate the protractor to make this happen. You have to move the tonearm over to step 2, right?
My second question:
Assuming that I'm moving the tonearm over to the lines for step 2 on the protractor, should the stylus fall right on the bullseye as it did at step 1? Mine doesn't, but I assume there's nothing I can do about it without having the whole tonearm assembly remounted. It's a VPI Prime, which doesn't appear to have any adjustments for pivot-to-spindle distance.
I hope the questions make sense, as it's not easy to explain without having the protractor in front of you. Hopefully, someone with experience using the Fleickert can help.
Thanks for any advice!
Scott
I'd been following the discussion about the Feickert Protractor and finally decided to order one. I'd been using the GeoDisc for setup, and I wanted something a little more precise. I have been working with the protractor this evening, and the directions on the second step are not entirely clear. The first step is easy enough - set up the protractor with the gauge pin over the pivot point (easy to find on a unipivot) and adjust the cartridge to the bulls eye in the geometry you want (I'm using Baerwald). Moving to step two things become unclear
My first question:
Step 2 says "..we don't need to aim over the pivot point anymore. Please rotate the Protractor so that the stylus tip touches the cross hairs at step 2." The picture shows the stylus sitting right on the target. Correct me if I'm wrong, but that's not physically possible. The cross hairs at step 2 are a fixed distance away from the cross hairs at step 1. There's no way to rotate the protractor to make this happen. You have to move the tonearm over to step 2, right?
My second question:
Assuming that I'm moving the tonearm over to the lines for step 2 on the protractor, should the stylus fall right on the bullseye as it did at step 1? Mine doesn't, but I assume there's nothing I can do about it without having the whole tonearm assembly remounted. It's a VPI Prime, which doesn't appear to have any adjustments for pivot-to-spindle distance.
I hope the questions make sense, as it's not easy to explain without having the protractor in front of you. Hopefully, someone with experience using the Fleickert can help.
Thanks for any advice!
Scott
- ...
- 19 posts total
- 19 posts total