How much difference does an anti-vibration audio rack make


Hi,

I have just put together a Hi-Fi system. It's a two channel system consisting of B&W 800D3 speakers, McIntosh C1100 C+T Pre-Amp and two McIntosh MC1.25KW mono blocks. I considered buying a carbon fibre anti-vibration audio rack from Bassocontinuo (Aeon 2.0) but did not finally end up buying it due to the fact that there were two many racks in my living room which houses my Hi-Fi system. I am currently using a lovely solid wood TV cabinet to house the above equipment.

Question is whether the system gives me a sub-par performance due to the absence of a specialist audio rack or the difference is immaterial. I could not try it to determine as the carbon fibre racks are not stocked by the dealer due to the costs.

Thanks
128x128sudhirgoel
I have found racks do make a difference, but also believe you don't have to spend a fortune on a good one. The thing that made the biggest difference in vibration control, for me, wasn't a rack, but going from a house with suspended floor (basement) to a house with a 6" slab of concrete sitting on hard ground. Now THAT made a big difference. IMO.
Anti-vibration makes a big difference, and one of the best inexpensive finds I have come across lately are the E.V.A. Anti-Vibration Pad, 2" x 2" x 7/8" bricks by DiversiTech. These are attractive and come in a box of 48 for $26.40. And, they work!!!

https://www.supplyhouse.com/DiversiTech-MP-2E-EVA-Anti-Vibration-Pad-2-x-2-x-7-8


Guys... guys... guys --- he was asking for a rack, not anti-vibration devices. Plenty of those available, that work.

I use Stillpoints Ultra SS under all my equipment, and Isoacoustic GAIA for under my floorstanding speakers
Here's my idea for the best rack but I have no idea if it exists. The support columns would be non ferrous or even PVC in a cylindrical form. At the bottom of each of the 4 supports would be two very strong magnets constrained in an separate enclosure within the support and aligned in a like pole to like pole arrangement so that the magnetic repellent force would enable to rack to "float" without anything supported by the rack to be physically or mechanically connected to the floor. I may actually invent this once i finalize my solar powered windshield wipers.
bsmg. I use shelves with glass racks and use butyl rubber size 10 bottle stoppers. rather a bit like you submarine plugs... I must own a hundred of them.            
The one negative of magnetic support is the floating object's vibration has no where to go. So the airborne vibrations hitting the box. just keep it buzzing. So the floating boxes would need to each have a way to internally dampen out those vibrations.