KLE RCA plugs are the real deal!!


I ordered a set of KLE RCA Pure Harmony plugs to use for a pair of interconnects using Duelund 16ga wire. I previously built a set, with good results, using standard switchcraft plugs. The difference, even without break in, was staggering. Although the Switchcraft plugs sounded good themselves alone, however, when doing a direct comparison to the KLE's, the difference is clear. The cables using the SC plugs sounded harsher (especially on high end) when compared to the KLE. The cables seem to have a "free-er"(FLOABT) sound or more flow. Seemed as if the SC's were holding something back. 

As far as building the cables, the separated solder posts make things way easier. Everything is quite compact (especially for larger wires) in the SC plugs. The removable grommets are a nice feature if one wants to use thicker cable wraps, shrink tubing or shielding. 

One other area I think the KLE's are great for is trying wire combinations without soldering. With the "V" shaped solder posts, one could "wrap" the ends somewhat snug and use the wire locking screws. You would still have to be very delicate when hooking up...however this is something that is pretty much impossible with the SC's. 

As I plan to build my entire system's cables, KLE will be the plugs I use on everything. I highly recommend
aberyclark
Aberyclark,

I guess I feel that soldering is so easy you might as well do it even if it’s temporary.

Please check your negative contacts closely after you connect them to RCA jacks a couple of times. You will need good lighting and a magnifying glass if you don’t have really good vision, but it’s easy to see if the silver plating has worn off if you look for it. Honestly I’m not too worried about it. I can’t imagine that the sound of the cable will change in the absence of the incredibly thin coating of silver on that tiny contact. The fact that it wore off so quickly does indicate that they are pretty poorly made, though. I’m not happy about that, especially considering that a set is $60 something bucks.
These are easy to solder and hold up just fine. Just need the right technique. The thin coating will mark superficially easily but is a complete non issue. These are excellent low mass bullet plugs that make great shielded and unshielded RCA cables. They sound wonderful and just get out of the way with no editorializing.  Seems no product will please all, but it helps to know how to work with these. 


it helps to know how to work with these.

It has absolutely nothing to do with not knowing how to work with them. Simply pushing the connector onto an RCA jack two times COMPLETELY REMOVED the silver coating on the negative contacts. It is not just a "superficial mark" as you say. The silver coating, which KLEI puts on for a reason, is no longer there and able to do it’s job, whatever KLEI believes it may be.

These are easy to solder and hold up just fine.

I agree that they are easy to solder, but a nice mechanical connection prior to soldering is impossible due to the stupid v-shaped tab. A hole in the tab would be 100 times better than a "V". The "V" just makes no sense. These connectors do not hold up just fine as explained above. Why don’t you add a dealer disclaimer to your posts in threads like these? I know building cables is just a hobby for you, but it seems fair.
I accord with grannyring.  I've made ICs with these and can confirm that they sound great and hold up after many reinsertions.  For a solderless connection, the more expensive Bocchino RCAs are preferable, but with KLE it is still possible to make clean semi-solderless terminations by tacking a bit of solder at one end, tightly wrapping the fork with a few turns of bare wire, and tack at the end with solder.  To improve conductivity of the bare wire-wrapped section and block out oxidation, cover the wrap with a sealing coat of Perfect Path Total Contact graphene paste.  This cures to a hardshell finish.  
Agreed on the Total Contact paste.  Amazing stuff! Glad to see you are onto this wonderful tweak.