Why not horns?


I've owned a lot of speakers over the years but I have never experienced anything like the midrange reproduction from my horns. With a frequency response of 300 Hz. up to 14 Khz. from a single distortionless driver, it seems like a no-brainer that everyone would want this performance. Why don't you use horns?
macrojack
WOW!! Just like in school. I propose a little independent reading and everybody runs for cover.

Mapaman - I don't know much more than what I've read in your posts about the Walsh driver. I was aware of it back in the 1970s along with the Heil and the Magnaplanars. All were interesting and radical and exotic at the time. For reasons that elude me, the Heil and Walsh seemed to flash and fade while the Maggies slowly developed a huge following. I suspect the magazines had something to do with that.
YEs, Magnepan has a dealer network while OHM/Walsh went factory direct only back in the 90s. I owned Maggies and older OHMs concurrently from 1985-2007. Then I realized that OHM was still around and providing upgrades for their old speakers. I decided to try this and ended up dumping the Maggies and a pair of nice B&Ws as a result.

The Walsh driver is more a different way of looking at how traditional drivers produce and propogate sound and the theory required to deliver optimal results using drivers in this different manner. I've read where in Lincoln Walsh's theory all pistonic drivers operate as Walsh drivers as well, just not very well. There are really only 3 flavors of marketable Walsh driver around today, those used by OHM in their CLS driver configuration, the German Physiks DDD driver, and "TLS" designs produced by a gentleman named Dale Harder which are modeled after the originals produced by OHM years ago, which were reknowned for their SOTA sound quality when working and their fagility which resulted in the original designs not being a viable long term consumer product, despite the stellar results under normal conditions.
BTW Dale Harder's TLS Walsh speakers can be seen in his posted system here which is also an audiogon "featured" system.
Anyway, back to the real world (and away from theory)...

There is a pair of Klipsch Heresy HBR speakers up for sale on Ebay by a seller in the next town from me that I might be able to pick up and try for not much. I would try these in my wifes sunroom where the Dynaudio monitors are pictured currently in my system listing.

Questions:

- How much are a pair in good working order and condition worth?

- If I do it, what kind of sound should I expect in comparison to a pair of good Dynaudio monitors? BTW the Dyns are rear ported and bass heavy in that room. Speakers in that room have to stay close to the wall. The Heresys seem like a reasonable design to try there in that they are reputably not bass heavy.
Go Altec pass up Klipsch. Why pay more for cheaper build poor design and lower performing transducers. To me Klipschs are responsible for much of the negatives tossed about by non horn owners. When folks not in the know think horn Klipsch is whats on there mind. When the uninformed think speaker Bose is on there mind. Sure a K horns far better than bose but the analogy holds true.