Good Processor

I know all the different Audyssey levels. But Audyssey Pro is the one which sets it to a level what impress many people. We use Onkyo for Surround. because brands like Marantz, Denon, Cambridge, Nad ( which I sold for a long period) are all 2 dimensional brands. I am not interested in 2-dimensional sound anymore. I call this standard audio. There are a few Onkyo surround amps and pre amps with XT-32 which can be used for Audessey Pro. There is no Onkyo amp with XT what can be used for Audessey Pro. We sell the Onkyo PR-SC5509 to people who use stereo and surround. Not only surround. Last week we were at an old farm. 8m high, 8m wide and about 8,5 m long. With a lot of glass. I thought it would be impossible to get a good result. We only tested with XT and the results were stunning. Speakers were more than 7.5m from eachtoher. The focus was extreemly sharp and instruments were focussed at the right dimensions. Even at high volums the sound was still very musical. In the past I had a few rooms like these as well. To be unnest the results were not so good in the past without roomacoustic systems. I had some clients in the past with room acoustic pannels. It cost them a lot of money. They still had a lot of acoustic problems. Audessey have a good back up and they are nice people. But they have not a lot knowledge about highend. And about dimensions of instruments and voices at recordings. They way they say you have to measure still has problem of loosing too much dynamics. This is why I did try many different ways of measuring. I wanted to get a better result, and at the end I found. The level we have found is very easy to sell. Quality sell it self.

The issue raised was... what processor for two channel listening given full range, "highly revealing speakers"

The OP asks..
For good stereo what is a better option? Going with an older high end pro like a meridian 861 version 2.8/4 or Halcro 100 OR buying a newer unit such as the Integra 80.2/3.

So... working through the Audyssey site... It turns out that only MultEQ XT32 will process the main LR channels along with the sub. Every other Audyssey product processes the surrounds and sub only. (I did not recognize this limitation... no wonder I was never impressed by the RC treatment listening to two channel music)

Now I understand bo's post
10 years ago I always had big 2-channel highend systems without a sub. We sold the more expensive Rel sub's. But for me they were too slow and I did not like the focus wenn it was used. XT-32 was the first system I found 2 channel with a sub good enough to use for myself. Before roomcorrection I was never interested in a sub for stereo use. ......

This recommendation fits my current setup where my classic Kef 104's need a bit of low frequency extension but integrating the sub is problematic and never as good as full range modern speakers. XT-32 is the Audessy soln to my needs of integrating the sub with my mains for 2.1 and managing my room acoustics in a WAF manner.... (the 5.1 listening improvement is just gravy)

The old advice of using a sub with your two channel listening so that your mains were easier to drive (but of course the limits of how well you could integrate the sub with monitors remained) can now be upgraded. DSP processing of the Main LR and sub using Audessy XT-32 is a big jump in technology and can improve your two channel plus.1 listening in the room that you have... (Not to mention your mulitchannel listening experience)

Are many people using XT-32 for critical listening of 2.1 music? Probably a separate thread!

Tcatman wrote: So... working through the Audyssey site... It turns out that only MultEQ XT32 will process the main LR channels along with the sub. Every other Audyssey product processes the surrounds and sub only.

You are mistaken. All implementations of Audyssey (other than 2EQ) will process the main LR channels and the sub.

'Tcatman'good story, you understand it very well. Keep one thing in mind. Subwoofers which are sealed and have only the speakerunit at the front side will get the best results by far. The last few months many people were surprised by the stealth quality of my subwoofer with Audessey Pro. They aks me; can you arange it for me as well. Next few months I will do some audio presentations with Audessey pro. I also will talk about the difference between 2 and 3-dimensional sound. I have already professional camera for full hd recording for recording my presentations. So more people can see and hear were I am talking about.

what does this mean from Audessy's web site

MultEQ
Our standard resolution room correction solution that uses mid-level resolution filters for satellites and subwoofers.

MultEQ XT
Our advanced resolution room correction solution with high resolution equalization filters for satellites and subwoofers.

I may be wrong... but that is not what the web site implies.

http://forum.audiogon.com/cgi-bin/fr.pl?bhome&1358429802&openflup&41&4#41