Hi, need help with Snell Type a iii

No spikes yet, maybe I should, but I haven't gotten around to it.

I measured my placement. The room & speaker placement are symmetrical. The inside corner nearest the front wall is 19 inches off the wall. The opposite back corner of the same speaker is 30 inches off the wall. That corner is 24 inches from the side wall.

A few years back I went to a local dealers shop and Richard Vandersteen was there to give a brief discussion on Vandy speakers design, philosophy..etc. After Richard was done my first thought was..yeah...that's what Peter Snell did with the Type A 25-ish years ago. No doubt I live in a small world, but I think the Type A(I, II, III, IIIi) is one of the best deals around. One of these days I'll do the crossover caps...but there's always things higher on the list. I've been toying with the idea of stepping up to a DNA 500, but I haven't been bitten to a point of no return yet.

Fishboat,
You have a great speaker...Peter Snell was a terrific and prolific designer during his all too short life.
The so called thickness in the bass, if you've heard this (someone else mentioned this) would be virtually eliminated with the use of good spikes.
The cabinets were excellent, and the veneers wonderful as I recall--but nothing helps eliminate unwanted bass overhang and floor trapping beneath the cabinet like spikes.
They will transform.
Plus, I'd like to hear your comments after some crossover upgrades...I can't imagine what caps of this generation, and maybe a better air coil inducter could do.

Great speaker Fishboat.

Larry
(BTW, that's not the 'Bubbagump' shrimping fishboat is it?)

Yeah the crossover cap upgrade i'm a little nervous about. I have heard both arguments here on the site, Yes do it because the new caps are so much better and no don't because of the famed Peter Snell's way of building the crossover and dialing it in on his lap while listening on the master set. I would like to do it but I don't want to F anything up. Thoughts?

Larry,

I have a very large bass trap (5 feet high 18 inch deep triangle of 6# rockwool) in each corner just behind each speaker. Possibly this may be helping, but I really haven't noticed any issues with bass. I did notice it tighten up when I set the speakers on the slate slabs. I really should get off my..hindend and get the AIII woofers done. The AIII(12 inch woofer and extra tweeter in the rear) is a fair step up from the AII (10 inch woofer, no rear tweeter). From what I've read, the AIII is the best of the bunch. I just have very little time to work on such things.

And no such luck on the bubbagump boat..as I remember Gump cashed in on his shrimp boat business..I'm sort of on the other end of the stick where the fisn I catch nets out at 20-50 $/#..given the cost of a fishing trip these days.

bb,
I've heard/read the same issues with not messing up what Peter assembled. I'm not an electronic guy by any means, but if I did anything I'd do a one-for-one replacement with the caps & resistors..and probably leave other parts alone. Been a while since I thought about this, but wasn't Peter's tuning done on an inductor?? I think it's "Carl's Speakers..?" that has done work on the crossovers with some success. I looked him up:

http://www.classicloudspeakerservices.com/

Barfbag,(sorry I called you Fishboat)
I'm thinking that you can chose high quality caps of the same values and have the same results (with greater resolution, textures, air and space). The method Peter was using, was to dial in different values while listening, nothing more than that as I understand it. He was always employing, as I remember first order crossovers.
Jim Thiel, an old friend and mentor of mine, used to rave about HIS friend Peter and his designs. He was truly a legend.
I'd be comfortable in changing the crossover, just be sure to use caps that you have confidence in, like Auricaps, which I used in the LSA Sig and Statements. Or, better yet, if the budget allows, use Mundorf.
Silver solder would be in order too...others may have better ideas, but this should be reasonably good advice.

Larry